Take a picture of any toy, and you'll get a crochet pattern that's all yours. Make yours in the app

Home > Free Patterns > Animals > Crochet Snake Pattern: Free Amigurumi Snake
Snake free amigurumi crochet pattern, with two more pictures of the finished toy
Free crochet pattern

Crochet Snake Pattern: Free Amigurumi Snake

Free Snake amigurumi crochet pattern: intermediate level, around 5.5 in (14 cm) tall in fingering (4-ply) yarn. Each round with its stitch count, plus photos and a PDF.

What you see is what you make

Not made up by AI: every pattern picture (the toy, each piece, each step) starts as a 3D render of this pattern's own stitches from our crochet engine. An image model turns each render into the photo you see, and the shape is checked against the render.

This happy coiled snake is a fine pick once single crochet, increases and decreases feel comfortable.

At a glance

Skill levelIntermediate
Finished sizeabout 5.5 in (14 cm) tall
Yarnfingering (4-ply) cotton
Hook2.5 mm
ColorsGreen, Sunny yellow, Red, Dark chocolate, Pink, Mustard
Piecesinner coil and neck, coil ring segment x8, yellow face patch, head, snout, belly strip, tail tip, tongue fork x2

What you'll need

Yarn

fingering (4-ply): yarn weight 1, super fine

  • Green: about 109 yd (100 m), 1 ball, 1.75 oz / 186 yd (50 g / 170 m)
  • Sunny yellow: about 27 yd (25 m), 1 ball, 1.75 oz / 186 yd (50 g / 170 m)
  • Red: a small scrap
  • Dark chocolate: a small scrap
  • Pink: a small scrap
  • Mustard: a small scrap

Tools and notions

  • 2.5 mm crochet hook: for fingering (4-ply) cotton yarn
  • 15 mm black safety eyes: 1 pair
  • Polyester toy stuffing: a couple of big handfuls
  • Yarn needle (big eye, blunt tip)
  • 1 stitch marker: a paperclip or scrap of yarn works too
  • Scissors

Size and gauge

With this yarn and a 2.5 mm hook, Snake ends up around 5.5 in (14 cm) tall: roughly 27 sc and 30 rounds per 4 in (10 cm). Gauge doesn't really matter, a different yarn or hook just makes it a different size.

Abbreviations (US terms)

Rndround, worked in a continuous spiral: don't join, move the stitch marker up each round
Rowworked back and forth: turn at the end of each row
scsingle crochet
incincrease: 2 sc in the same stitch
decdecrease: sc 2 stitches together (the invisible decrease looks neatest)
chchain
st(s)stitch(es)
( ) x6repeat what's in brackets 6 times
(12)the stitches you have at the end of the round

New to these? Our crochet abbreviations page shows how to work each one.

Good to know

  • Crochet tightly so the stuffing doesn't show through. Seeing gaps? Go down a hook size.
  • Work in a spiral and move your stitch marker up at the start of each round.
  • Leave a long tail on every piece you'll sew on.
  • Safety eyes and small parts can be a choking hazard for children under 3. For little ones, embroider the eyes instead.

Techniques in this pattern

New to one of these? Each tutorial shows it step by step, with photos.

All the crocheted pieces of the Snake amigurumi, laid out
The pieces you'll make: inner coil and neck, coil ring segment (8), yellow face patch, head, snout, belly strip, tail tip, tongue fork (2).

Rather follow pictures? Make the snake in the app.

Crochet Pirate walks you through this pattern one step at a time: a picture at every checkpoint and a counter for your rounds.

Snake crochet pattern

Make each piece in order, counting your stitches at the end of every round: the number in brackets is how many you should have.

Inner coil and neck

Worked in green.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)
Rnd 3(sc, inc) x6(18)
Rnd 4(sc 2, inc) x6(24)
Rnd 5(sc 3, inc) x6(30)
Rnd 6(sc 4, inc) x6(36)
Rnd 7(sc 5, inc) x6(42)
Rnd 8(sc 6, inc) x6(48)

Check: Yours should look like a flat circle about 2.2 in (5.7 cm) across, with 48 stitches around the edge.

RoundInstructionsStitches
Rnds 9-13sc in each st around(48)
Rnd 14(sc 6, dec) x6(42)
Rnd 15(sc 5, dec) x6(36)
Rnd 16(sc 4, dec) x6(30)

Check: Yours should look like an open cup about 2.2 in (5.7 cm) wide and 0.7 in (1.7 cm) deep, with 30 stitches around the edge.

RoundInstructionsStitches
Rnd 17sc in each st around(30)
Rnd 18(sc 13, dec) x2(28)
Rnds 19-21sc in each st around(28)
Rnd 22(sc 5, dec) x4(24)

Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.

Check: Yours should look like a stuffed piece about 2.2 in (5.6 cm) wide and 2.3 in (5.9 cm) tall, with an opening of 24 stitches left.

RoundInstructionsStitches
Rnd 23dec x12(12)
Rnd 24dec x6(6)

Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight, the hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.

Check: Done! Your inner coil and neck should now be a firmly stuffed, fully closed piece about 2 in (5.2 cm) wide and 2.5 in (6.4 cm) tall.

Snake amigurumi: the finished inner coil and neck
The inner coil and neck, finished

Coil ring segment (make 8)

Worked in green and sunny yellow.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)
Rnd 3(sc, inc) x6(18)
Rnd 4(sc 2, inc) x6(24)
Rnd 5(sc 3, inc) x6(30)

Check: Yours should look like a flat circle about 1.4 in (3.5 cm) across, with 30 stitches around the edge.

RoundInstructionsStitches
Rnd 6sc in each st around(30)

Note: Color change! On the last stitch of round 6, stop with 2 loops on the hook and pull the sunny yellow yarn through them. Carry on with sunny yellow from round 7. Tie the two tails together loosely on the inside.

RoundInstructionsStitches
Rnds 7-9sc in each st around(30)

Note: Color change! On the last stitch of round 9, stop with 2 loops on the hook and pull the green yarn through them. Carry on with green from round 10. Tie the two tails together loosely on the inside.

RoundInstructionsStitches
Rnd 10sc in each st around(30)

Check: Yours should look like an open cup about 1.4 in (3.5 cm) wide and 0.7 in (1.7 cm) deep, with 30 stitches around the edge.

RoundInstructionsStitches
Rnd 11sc in each st around(30)
Rnd 12(sc 3, dec) x6(24)

Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.

Check: Yours should look like a stuffed piece about 1.6 in (4.1 cm) wide and 1.1 in (2.8 cm) tall, with an opening of 24 stitches left.

RoundInstructionsStitches
Rnd 13(sc 2, dec) x6(18)
Rnd 14(sc, dec) x6(12)
Rnd 15dec x6(6)

Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight, the hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.

Check: Done! Your coil ring segment should now be a firmly stuffed, fully closed piece about 1.5 in (3.7 cm) wide and 1.5 in (3.7 cm) tall.

Snake amigurumi: the finished coil ring segment
The coil ring segment, finished

Yellow face patch

Worked in sunny yellow.

Note: Ch 16. Make a slip knot and chain 16. That short chain is the spine of the oval, you'll crochet all the way around it.

RoundInstructionsStitches
Rnd 1sc 14, 3 sc in last ch, sc 14, 3 sc in skipped ch(34)
Rnd 2inc, sc 14, inc x3, sc 14, inc x2(40)
Rnd 3sc, inc, sc 14, (sc, inc) x3, sc 14, (sc, inc) x2(46)

Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing. Set it aside: it goes on the head while you make it, just before the eyes go in.

Check: Done! Your yellow face patch should now be a flat oval about 2.9 in (7.3 cm) long and 2.1 in (5.4 cm) wide with a long yarn tail.

Snake amigurumi: the finished yellow face patch
The yellow face patch, finished

Head

Worked in green.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)
Rnd 3(sc, inc) x6(18)
Rnd 4(sc 2, inc) x6(24)
Rnd 5(sc 3, inc) x6(30)
Rnd 6(sc 4, inc) x6(36)
Rnd 7(sc 5, inc) x6(42)
Rnd 8(sc 6, inc) x6(48)
Rnd 9(sc 7, inc) x6(54)
Rnd 10(sc 8, inc) x6(60)
Rnd 11(sc 9, inc) x6(66)

Check: Yours should look like a flat circle about 3.1 in (7.8 cm) across, with 66 stitches around the edge.

RoundInstructionsStitches
Rnds 12-15sc in each st around(66)

Note: Eye time, the face goes on first. Take the yellow face patch you made earlier. Pin the yellow face patch on round 10, at the front, in the middle. Push each safety eye through the yellow face patch and into the head between round 14 and round 15, with 12 stitches between them. Look at it from a distance, then snap the backs on inside: once they click, they stay forever. While you can still reach inside, sew around the edge of each yellow face patch with its long tail.

RoundInstructionsStitches
Rnd 16sc in each st around(66)
Rnd 17(sc 9, dec) x6(60)
Rnd 18(sc 8, dec) x6(54)
Rnd 19(sc 7, dec) x6(48)

Check: Yours should look like an open cup about 3.1 in (7.8 cm) wide and 0.7 in (1.7 cm) deep, with 48 stitches around the edge.

RoundInstructionsStitches
Rnd 20(sc 6, dec) x6(42)
Rnd 21(sc 5, dec) x6(36)
Rnd 22(sc 4, dec) x6(30)
Rnd 23(sc 3, dec) x6(24)

Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.

Check: Yours should look like a stuffed piece about 2.8 in (7.1 cm) wide and 2 in (5.1 cm) tall, with an opening of 24 stitches left.

RoundInstructionsStitches
Rnd 24(sc 2, dec) x6(18)
Rnd 25(sc, dec) x6(12)
Rnd 26dec x6(6)

Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight, the hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.

Check: Done! Your head should now be a firmly stuffed, fully closed piece about 2.5 in (6.3 cm) wide and 2.5 in (6.3 cm) tall.

Snake amigurumi: the finished head
The head, finished

Snout

Worked in green.

Note: Ch 4. Make a slip knot and chain 4. That short chain is the spine of the oval, you'll crochet all the way around it.

RoundInstructionsStitches
Rnd 1sc 2, 3 sc in last ch, sc 2, 3 sc in skipped ch(10)
Rnd 2inc, sc 2, inc x3, sc 2, inc x2(16)

Check: Yours should look like a small flat oval with 16 stitches around the edge.

RoundInstructionsStitches
Rnds 3-4sc in each st around(16)

Note: Slip stitch into the next stitch, then cut the yarn leaving a long tail (about 12 in / 30 cm), you'll sew the snout on with it. Stuff it softly, pushing the stuffing to the end with the back of your hook.

Check: Done! Your snout should now be an open piece about 0.9 in (2.2 cm) wide and 0.4 in (0.9 cm) long, with a long yarn tail.

Snake amigurumi: the finished snout
The snout, finished

Belly strip

Worked in sunny yellow.

Note: Ch 8. Make a slip knot and chain 8. This piece is flat: you crochet back and forth along that chain in rows, turning at the end of each one.

RoundInstructionsStitches
Row 1sc 7(7)
Rows 2-4ch 1, turn, sc 7(7)
Row 5ch 1, turn, dec, sc 5(6)
Row 6ch 1, turn, sc 4, dec(5)

Check: Yours should look like a flat trapezoid about 0.7 in (1.9 cm) wide and 0.8 in (2 cm) tall, 5 stitches across its last row.

RoundInstructionsStitches
Rows 7-11ch 1, turn, sc 5(5)

Note: Cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing, and pull it through the last loop.

Check: Done! Your belly strip should now be a flat trapezoid about 1 in (2.6 cm) wide and 1.5 in (3.7 cm) tall with a long yarn tail.

Snake amigurumi: the finished belly strip
The belly strip, finished

Tail tip

Worked in green and sunny yellow.

RoundInstructionsStitches
Rnd 14 sc in magic ring(4)
Rnd 2(sc, inc) x2(6)

Check: Yours should look like a flat circle about 0.3 in (0.7 cm) across, with 6 stitches around the edge.

RoundInstructionsStitches
Rnd 3sc in each st around(6)
Rnd 4(sc 2, inc) x2(8)
Rnd 5sc in each st around(8)

Note: Color change! On the last stitch of round 5, stop with 2 loops on the hook and pull the sunny yellow yarn through them. Carry on with sunny yellow from round 6. Tie the two tails together loosely on the inside.

RoundInstructionsStitches
Rnd 6(sc 3, inc) x2(10)
Rnd 7sc in each st around(10)

Note: Color change! On the last stitch of round 7, stop with 2 loops on the hook and pull the green yarn through them. Carry on with green from round 8. Tie the two tails together loosely on the inside.

Check: Yours should look like an open cup about 0.5 in (1.2 cm) wide and 0.9 in (2.2 cm) deep, with 10 stitches around the edge.

RoundInstructionsStitches
Rnd 8(sc 4, inc) x2(12)
Rnds 9-10sc in each st around(12)

Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.

Check: Yours should look like a stuffed piece about 0.6 in (1.6 cm) wide and 1.3 in (3.2 cm) tall, with an opening of 12 stitches left.

RoundInstructionsStitches
Rnd 11dec x6(6)

Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight, the hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.

Check: Done! Your tail tip should now be a firmly stuffed, fully closed piece about 0.6 in (1.6 cm) wide and 1.4 in (3.5 cm) tall.

Snake amigurumi: the finished tail tip
The tail tip, finished

Tongue fork (make 2)

Worked in red.

Note: Ch 5. Make a slip knot and chain 5. This is a strand: one row back along the chain and it's done.

RoundInstructionsStitches
Row 1sc 4(4)

Note: Cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing, and pull it through the last loop.

Check: Done! Your tongue fork should now be a flat strip about 0.6 in (1.5 cm) wide and 0.1 in (0.3 cm) tall with a long yarn tail.

Snake amigurumi: the finished tongue fork
The tongue fork, finished

Putting the snake together

All your pieces are ready, so take your time and let us bring your snake together one piece at a time.

Snake crochet assembly: attach the coil ring segments

1. Attach the coil ring segments

They go on the inner coil and neck at round 8, spread evenly all the way round (the first one at the front, a little to the toy's left). Pin them all first so the gaps are even. For each one: lay the coil ring segment along the inner coil and neck, running toward the toy's left from its starting end. Pin it, then sew it on along both sides with the long tail, catching the inner coil and neck underneath.

Snake crochet assembly: attach the snout

2. Attach the snout

Place it on the head at round 13, at the front, in the middle. Hold the open edge flat against the head and pin it all round. Using the long tail, sew all the way around the edge: under one stitch of the snout, then under the head right next to it. Add a last bit of stuffing just before the gap closes. It should end up pointing straight out.

Snake crochet assembly: attach the tongue forks

3. Attach the tongue forks

Place the first one on the head at round 11, at the front, in the middle. Sew the starting end of the tongue fork (the end with the slip knot) to the head with its yarn tail, a few firm stitches through that end only, and let the rest hang down. Then do the same for the other one on the other side, mirrored.

Snake crochet assembly: attach the head

4. Attach the head

Place it right on the top of the inner coil and neck (its last round, 24), centered. Hold the starting end of the head (where the magic ring is) against the inner coil and neck and sew around where they touch, going back and forth, then pull the yarn snug so there's no gap. It should end up pointing straight out.

Snake crochet assembly: attach the belly strip

5. Attach the belly strip

Place it on the inner coil and neck at round 17, at the front, in the middle. Pin the flat belly strip flat on the inner coil and neck, and sew around its edge with the long tail, catching the inner coil and neck underneath with every stitch. It will curve to follow the inner coil and neck, that's what you want.

Snake crochet assembly: attach the tail tip

6. Attach the tail tip

Place it on the inner coil and neck at round 12, at the front, a little to the toy's right. Lay the tail tip along the inner coil and neck, running backward from its starting end. Pin it, then sew it on along both sides with the long tail, catching the inner coil and neck underneath.

Snake crochet assembly: sew the nostrils

7. Sew the nostrils

With dark chocolate yarn on the snout, around round 1, one on each side. How: make 4 or 5 stitches on top of each other over the same 2 stitches until it looks nice and plump.

Snake crochet assembly: sew the mouth

8. Sew the mouth

With dark chocolate yarn on the yellow face patch, around round 1, on the circle. How: come up at one corner, go down 3 stitches along, then catch the middle of that long stitch and pull it down one round to make a curve.

Snake crochet assembly: sew the cheeks

9. Sew the cheeks

With pink yarn on the yellow face patch, around round 1, on the circle. How: 2 short stitches side by side make one cheek.

Snake crochet assembly: sew the belly segment 1

10. Sew the belly segment 1

With mustard yarn on the belly strip, around round 2, on the circle. How: small stitches, each one stitch long, one after another.

Snake crochet assembly: sew the belly segment 2

11. Sew the belly segment 2

With mustard yarn on the belly strip, around round 4, on the circle. How: small stitches, each one stitch long, one after another.

Snake crochet assembly: sew the belly segment 3

12. Sew the belly segment 3

With mustard yarn on the belly strip, around round 6, on the circle. How: small stitches, each one stitch long, one after another.

Snake crochet assembly: sew the belly segment 4

13. Sew the belly segment 4

With mustard yarn on the belly strip, around round 8, on the circle. How: small stitches, each one stitch long, one after another.

Snake crochet assembly: sew the belly segment 5

14. Sew the belly segment 5

With mustard yarn on the belly strip, around round 10, on the circle. How: small stitches, each one stitch long, one after another.

Snake crochet assembly: hide the tails

15. Hide the tails

For every loose tail: thread it on the needle, poke it into the toy and out somewhere else, give it a little tug, and snip it close. The end disappears inside. All done!

All done!

You made it! Your own snake is all curled up and ready for snuggles, and you crafted each part yourself.

Made one? Share it with #crochetpirate. We'd love to see it.

Prefer paper?

The whole pattern as a printable PDF, free with a Crochet Pirate account. Sign in, and your download starts right away.

More patterns like this

Questions about this pattern

How do you crochet a snake like this one?

Made in separate pieces, then stitched up. The inner coil and the neck are one green egg shape, and around its bottom, eight little green balls with a yellow stripe get sewn on to form the coil. On the round head go a snout, a yellow face patch, safety eyes, and a red forked tongue, while a yellow belly strip and a tail tip are added at the front. Each piece is single crochet, done in the round or in short rows, and there's a photo of every piece and every sewing step.

Is this a temperature snake?

No. A temperature snake is a long tube with one stripe for each day's temperature, so it grows over a whole year. This snake is a toy about 5.5 in (14 cm) tall that sits coiled up. If you like a stripy snake, you can still work each of the eight coil balls in a different color.

How do I make the forked tongue?

Every tongue half is a little red band: make 5 chains, then work 4 single crochet back down the chain. Crochet two of these, then sew each one by its starting end right below the snout, next to each other, and leave the rest dangling so the two halves form a fork.

How big is the finished snake?

With fingering (4-ply) yarn and a 2.5 mm hook, your snake ends up around 5.5 in (14 cm) tall. Use a thicker yarn and a bigger hook, and you get a bigger toy, the rounds don't change.

What yarn and hook do I need?

Fingering (4-ply) cotton with a 2.5 mm hook, in 6 colors: green, sunny yellow, red, dark chocolate, pink, mustard. Any yarn works if you go up or down a hook size to keep the stitches tight.

Is this pattern good for beginners?

It's labeled Intermediate: you'll be fine if you've already made a toy or two. Each round still lists its stitch count, and the checkpoints let you see how every piece should look.

Can I sell what I make?

Yes, you're welcome to sell the toys you make from this pattern, and a mention of Crochet Pirate is appreciated. Please don't share or sell the pattern itself; link to this page instead.

Copyright 2026 Crochet Pirate. This pattern is free for personal use.

The Crochet Pirate app

Snap a photo. Get your own pattern.

Snap anything you love, like a pet, a mug or a drawing. Crochet Pirate designs it as an amigurumi, then walks you through every stitch with a picture at each checkpoint and a counter for your rounds.

Step 1: a photo of a small dog in a red bandana

Snap a photo

Step 2: the dog as a crochet toy, with the first rounds of its pattern

Get your pattern

Step 3: the finished crochet dog held in a hand

Crochet it