Take a picture of any toy, and you'll get a crochet pattern that's all yours. Make yours in the app

Home > Free Patterns > Animals > Crochet Panda Pattern: Free Amigurumi Panda Bear
Sitting panda free amigurumi crochet pattern, with two more pictures of the finished toy
Free crochet pattern

Crochet Panda Pattern: Free Amigurumi Panda Bear

Free Sitting panda amigurumi crochet pattern: intermediate, about 6.5 in (17 cm) tall in DK (light worsted) yarn. Every round with its stitch count, photos and a PDF.

What you see is what you make

Not made up by AI: every pattern picture (the toy, each piece, each step) starts as a 3D render of this pattern's own stitches from our crochet engine. An image model turns each render into the photo you see, and the shape is checked against the render.

Welcome! This cuddly sitting panda is a lovely first project, and we'll go one small, friendly step at a time until you're holding a plushie you made yourself.

At a glance

Skill levelIntermediate
Finished sizeabout 6.5 in (17 cm) tall
YarnDK (light worsted) cotton
Hook3.5 mm (US E-4)
ColorsCream, Black, Gray, Sunny yellow, Pea green, Green
Piecesbody, eye patch x2, head, muzzle, ear x2, arm x2, foot x2, foot pad x2, tail

What you'll need

Yarn

DK (light worsted): yarn weight 3, light

  • Cream: about 66 yd (60 m), 1 ball, 1.75 oz / 137 yd (50 g / 125 m)
  • Black: about 44 yd (40 m), 1 ball, 1.75 oz / 137 yd (50 g / 125 m)
  • Gray: a small scrap
  • Sunny yellow: a small scrap, only for the bamboo
  • Pea green: about 5 yd (5 m), 1 ball, 1.75 oz / 137 yd (50 g / 125 m), only for the bamboo
  • Green: a small scrap, only for the bamboo

Tools and notions

  • 3.5 mm crochet hook: for DK (light worsted) cotton yarn
  • 10 mm black safety eyes: 1 pair
  • Polyester toy stuffing: a couple of big handfuls
  • Yarn needle (big eye, blunt tip)
  • 1 stitch marker: a paperclip or scrap of yarn works too
  • Scissors

Size and gauge

When you use this yarn, the sitting panda ends up roughly 6.5 in (17 cm) tall with a 3.5 mm (US E-4) hook: around 20 sc and 22 rounds per 4 in (10 cm). Gauge doesn't really matter: a different yarn or hook just makes it a different size.

Abbreviations (US terms)

Rndround, worked in a continuous spiral: don't join, move the stitch marker up each round
scsingle crochet
incincrease: 2 sc in the same stitch
decdecrease: sc 2 stitches together (the invisible decrease looks neatest)
chchain
st(s)stitch(es)
( ) x6repeat what's in brackets 6 times
(12)the stitches you have at the end of the round

New to these? Our crochet abbreviations page shows how to work each one.

Good to know

  • Crochet tightly so the stuffing doesn't show through. Seeing gaps? Go down a hook size.
  • Work in a spiral and move your stitch marker up at the start of each round.
  • Leave a long tail on every piece you'll sew on.
  • Safety eyes and small parts can be a choking hazard for children under 3. For little ones, embroider the eyes instead.

Techniques in this pattern

New to one of these? Each tutorial shows it step by step, with photos.

All the crocheted pieces of the Sitting panda amigurumi, laid out
The pieces you'll make: body, eye patch (2), head, muzzle, ear (2), arm (2), foot (2), foot pad (2), tail.

Rather follow pictures? Make the sitting panda in the app.

Crochet Pirate walks you through this pattern one step at a time: a picture at every checkpoint and a counter for your rounds.

Sitting panda crochet pattern

Make each piece in order, counting your stitches at the end of every round: the number in brackets is how many you should have.

Body

Worked in cream and black.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)
Rnd 3(sc, inc) x6(18)
Rnd 4(sc 2, inc) x6(24)
Rnd 5(sc 3, inc) x6(30)
Rnd 6(sc 4, inc) x6(36)
Rnd 7(sc 5, inc) x6(42)
Rnd 8(sc 6, inc) x6(48)

Check: Yours should look like a flat circle about 3 in (7.6 cm) across, with 48 stitches around the edge.

RoundInstructionsStitches
Rnds 9-15sc in each st around(48)
Rnd 16(sc 6, dec) x6(42)

Check: Yours should look like an open cup about 3 in (7.6 cm) wide and 1.3 in (3.2 cm) deep, with 42 stitches around the edge.

RoundInstructionsStitches
Rnd 17sc in each st around(42)

Note: Color change! On the last stitch of round 17, stop with 2 loops on the hook and pull the black yarn through them. Carry on with black from round 18. Tie the two tails together loosely on the inside.

RoundInstructionsStitches
Rnd 18(sc 5, dec) x6(36)
Rnd 19sc in each st around(36)
Rnd 20(sc 4, dec) x6(30)
Rnd 21(sc 3, dec) x6(24)
Rnd 22(sc 2, dec) x6(18)

Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.

Check: Yours should look like a stuffed piece about 3.3 in (8.5 cm) wide and 2.8 in (7 cm) tall, with an opening of 18 stitches left.

RoundInstructionsStitches
Rnd 23(sc, dec) x6(12)
Rnd 24dec x6(6)

Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight, the hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.

Check: Done! Your body should now be a firmly stuffed, fully closed piece about 3.1 in (7.9 cm) wide and 3.1 in (7.9 cm) tall.

Sitting panda amigurumi: the finished body
The body, finished

Eye patch (make 2)

Worked in black.

Note: Ch 4. Make a slip knot and chain 4. That short chain is the spine of the oval, you'll crochet all the way around it.

RoundInstructionsStitches
Rnd 1sc 2, 3 sc in last ch, sc 2, 3 sc in skipped ch(10)
Rnd 2inc, sc 2, inc x3, sc 2, inc x2(16)

Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing. Set it aside: it goes on the head while you make it, just before the eyes go in.

Check: Done! Your eye patch should now be a flat oval about 1.1 in (2.9 cm) long and 1 in (2.5 cm) wide with a long yarn tail.

Sitting panda amigurumi: the finished eye patch
The eye patch, finished

Head

Worked in cream.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)
Rnd 3(sc, inc) x6(18)
Rnd 4(sc 2, inc) x6(24)
Rnd 5(sc 3, inc) x6(30)
Rnd 6(sc 4, inc) x6(36)
Rnd 7(sc 5, inc) x6(42)
Rnd 8(sc 6, inc) x6(48)
Rnd 9(sc 7, inc) x6(54)
Rnd 10(sc 8, inc) x6(60)

Check: Yours should look like a flat circle about 3.7 in (9.5 cm) across, with 60 stitches around the edge.

RoundInstructionsStitches
Rnds 11-14sc in each st around(60)

Note: Eye time, the face goes on first. Take the eye patches you made earlier. Pin the eye patches on round 13, one on each side of the front. Push each safety eye through the eye patch and into the head between round 13 and round 14, with 10 stitches between them. Look at it from a distance, then snap the backs on inside: once they click, they stay forever. While you can still reach inside, sew around the edge of each eye patch with its long tail.

RoundInstructionsStitches
Rnd 15sc in each st around(60)
Rnd 16(sc 8, dec) x6(54)
Rnd 17(sc 7, dec) x6(48)

Check: Yours should look like an open cup about 3.7 in (9.5 cm) wide and 0.9 in (2.3 cm) deep, with 48 stitches around the edge.

RoundInstructionsStitches
Rnd 18(sc 6, dec) x6(42)
Rnd 19(sc 5, dec) x6(36)
Rnd 20(sc 4, dec) x6(30)
Rnd 21(sc 3, dec) x6(24)
Rnd 22(sc 2, dec) x6(18)

Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.

Check: Yours should look like a stuffed piece about 3.5 in (8.8 cm) wide and 2.6 in (6.7 cm) tall, with an opening of 18 stitches left.

RoundInstructionsStitches
Rnd 23(sc, dec) x6(12)
Rnd 24dec x6(6)

Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight, the hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.

Check: Done! Your head should now be a firmly stuffed, fully closed piece about 3.1 in (7.9 cm) wide and 3.1 in (7.9 cm) tall.

Sitting panda amigurumi: the finished head
The head, finished

Muzzle

Worked in cream.

Note: Ch 5. Make a slip knot and chain 5. That short chain is the spine of the oval, you'll crochet all the way around it.

RoundInstructionsStitches
Rnd 1sc 3, 3 sc in last ch, sc 3, 3 sc in skipped ch(12)
Rnd 2inc, sc 3, inc x3, sc 3, inc x2(18)

Check: Yours should look like a small flat oval with 18 stitches around the edge.

RoundInstructionsStitches
Rnds 3-4sc in each st around(18)

Note: Slip stitch into the next stitch, then cut the yarn leaving a long tail (about 12 in / 30 cm), you'll sew the muzzle on with it. Stuff it softly, pushing the stuffing to the end with the back of your hook.

Check: Done! Your muzzle should now be an open piece about 1.3 in (3.3 cm) wide and 0.5 in (1.2 cm) long, with a long yarn tail.

Sitting panda amigurumi: the finished muzzle
The muzzle, finished

Ear (make 2)

Worked in black.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)
Rnd 3(sc, inc) x6(18)

Check: Yours should look like a flat circle about 1.1 in (2.9 cm) across, with 18 stitches around the edge.

RoundInstructionsStitches
Rnds 4-5sc in each st around(18)

Note: Press the opening flat, with the stitches of the two layers lined up. Crochet across through both layers, 9 sc, one through each pair of stitches, to close it in a straight seam. Cut the yarn leaving a long tail (about 12 in / 30 cm), you'll sew the ear on along this seam.

Check: Done! Your ear should now be a flat double layer about 1.5 in (3.9 cm) wide and 0.8 in (2 cm) long (pressed flat, not stuffed) with a straight seam at its end and a long yarn tail.

Sitting panda amigurumi: the finished ear
The ear, finished

Arm (make 2)

Worked in black.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)
Rnd 3(sc 5, inc) x2(14)

Check: Yours should look like a flat circle about 0.9 in (2.2 cm) across, with 14 stitches around the edge.

RoundInstructionsStitches
Rnds 4-6sc in each st around(14)
Rnd 7(sc 5, dec) x2(12)

Check: Yours should look like an open cup about 0.9 in (2.2 cm) wide and 0.9 in (2.2 cm) deep, with 12 stitches around the edge.

RoundInstructionsStitches
Rnds 8-11sc in each st around(12)

Note: Stuff it lightly, keep the last bit near the opening empty so it can lie flat. Press the opening flat, with the stitches of the two layers lined up. Crochet across through both layers, 6 sc, one through each pair of stitches, to close it in a straight seam. Cut the yarn leaving a long tail (about 12 in / 30 cm), you'll sew the arm on along this seam.

Check: Done! Your arm should now be a closed piece about 1 in (2.6 cm) wide and 1.8 in (4.6 cm) long with a straight seam across its end and a long yarn tail.

Sitting panda amigurumi: the finished arm
The arm, finished

Foot (make 2)

Worked in black.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)
Rnd 3(sc, inc) x6(18)
Rnd 4(sc 2, inc) x6(24)

Check: Yours should look like a flat circle about 1.5 in (3.8 cm) across, with 24 stitches around the edge.

RoundInstructionsStitches
Rnds 5-8sc in each st around(24)

Check: Yours should look like an open cup about 1.5 in (3.8 cm) wide and 0.7 in (1.8 cm) deep, with 24 stitches around the edge.

RoundInstructionsStitches
Rnd 9(sc 2, dec) x6(18)
Rnd 10(sc, dec) x6(12)

Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.

Check: Yours should look like a stuffed piece about 1.7 in (4.4 cm) wide and 1.1 in (2.9 cm) tall, with an opening of 12 stitches left.

RoundInstructionsStitches
Rnd 11dec x6(6)

Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight, the hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.

Check: Done! Your foot should now be a firmly stuffed, fully closed piece about 1.5 in (3.8 cm) wide and 1.5 in (3.8 cm) tall.

Sitting panda amigurumi: the finished foot
The foot, finished

Foot pad (make 2)

Worked in gray.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)

Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.

Check: Done! Your foot pad should now be a flat circle about 0.7 in (1.9 cm) across with a long yarn tail.

Sitting panda amigurumi: the finished foot pad
The foot pad, finished

Tail

Worked in cream.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)

Check: Yours should look like a flat circle about 0.7 in (1.9 cm) across, with 12 stitches around the edge.

RoundInstructionsStitches
Rnds 3-4sc in each st around(12)

Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.

Check: Yours should look like a stuffed piece about 0.9 in (2.2 cm) wide and 0.5 in (1.2 cm) tall, with an opening of 12 stitches left.

RoundInstructionsStitches
Rnd 5dec x6(6)

Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight, the hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.

Check: Done! Your tail should now be a firmly stuffed, fully closed piece about 0.7 in (1.9 cm) wide and 0.7 in (1.9 cm) tall.

Sitting panda amigurumi: the finished tail
The tail, finished

Putting the sitting panda together

All your pieces are ready, so let's gently bring them together and watch your panda come to life.

Sitting panda crochet assembly: attach the muzzle

1. Attach the muzzle

Place it on the head at round 11, at the front, in the middle. Hold the open edge flat against the head and pin it all round. Using the long tail, sew all the way around the edge: under one stitch of the muzzle, then under the head right next to it. Add a last bit of stuffing just before the gap closes. It should end up pointing straight out.

Sitting panda crochet assembly: attach the ears

2. Attach the ears

Place the first one on the head at round 19, one on each side of the front. Hold the straight seam against the head and sew along it through both pieces, back and forth. It should end up pointing straight out. Then do the same for the other one on the other side, mirrored.

Sitting panda crochet assembly: attach the head

3. Attach the head

Place it right on the top of the body (its last round, 24), centered. Hold the starting end of the head (where the magic ring is) against the body and sew around where they touch, going back and forth, then pull the yarn snug so there's no gap. It should end up pointing straight out.

Sitting panda crochet assembly: attach the arms

4. Attach the arms

Place the first one on the body at round 19, one on each side. Hold the straight seam against the body and sew along it through both pieces, back and forth. It should end up lying along it, pointing down. Then do the same for the other one on the other side, mirrored.

Sitting panda crochet assembly: attach the foot pads

5. Attach the foot pads

Place the first one right on the starting end of the foot (round 1), centered. Pin the flat foot pad flat on the foot, and sew around its edge with the long tail, catching the foot underneath with every stitch. It will curve to follow the foot, that's what you want. Then do the same for the other one on the other side, mirrored.

Sitting panda crochet assembly: attach the feet

6. Attach the feet

Place the first one on the body at round 7, one on each side of the front. Hold the closed end of the foot against the body and sew around where they touch, then pull the yarn snug so there's no gap. It should end up pointing out and forwards, about 70 degrees from straight out. Then do the same for the other one on the other side, mirrored.

Sitting panda crochet assembly: attach the tail

7. Attach the tail

Place it on the body at round 7, at the back, in the middle. Hold the starting end of the tail (where the magic ring is) against the body and sew around where they touch, going back and forth, then pull the yarn snug so there's no gap. It should end up pointing out and up, about 30 degrees from straight out.

Sitting panda crochet assembly: sew the nose

8. Sew the nose

With black yarn on the muzzle, around round 1, at the front, in the middle. How: make 4 or 5 stitches on top of each other over the same 2 stitches until it looks nice and plump.

Sitting panda crochet assembly: sew the mouth

9. Sew the mouth

With black yarn on the muzzle, around round 2, at the front, in the middle. How: come up at one corner, go down 3 stitches along, then catch the middle of that long stitch and pull it down one round to make a curve.

Sitting panda crochet assembly: sew the inner toe beans

10. Sew the inner toe beans

With gray yarn on the foot, around round 4, one on each side, toward the back. How: make 4 or 5 stitches on top of each other over the same 2 stitches until it looks nice and plump.

Sitting panda crochet assembly: sew the outer toe beans

11. Sew the outer toe beans

With gray yarn on the foot, around round 4, one on each side, toward the back. How: make 4 or 5 stitches on top of each other over the same 2 stitches until it looks nice and plump.

Sitting panda crochet assembly: hide the tails

12. Hide the tails

For every loose tail: thread it on the needle, poke it into the toy and out somewhere else, give it a little tug, and snip it close. The end disappears inside. All done!

Extra: the bamboo

Sitting panda amigurumi with its crocheted bamboo

Your panda would love a snack, so why not make a bamboo stalk to sit beside it? It's crocheted on its own once the sitting panda is done, and the sitting panda is complete without it.

Bamboo stalk

Worked in sunny yellow and pea green.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2(sc 2, inc) x2(8)

Note: Color change! On the last stitch of round 2, stop with 2 loops on the hook and pull the pea green yarn through them. Carry on with pea green from round 3. Tie the two tails together loosely on the inside.

Check: Yours should look like a flat circle about 0.5 in (1.3 cm) across, with 8 stitches around the edge.

RoundInstructionsStitches
Rnds 3-11sc in each st around(8)

Check: Yours should look like an open cup about 0.5 in (1.3 cm) wide and 1.8 in (4.5 cm) deep, with 8 stitches around the edge.

RoundInstructionsStitches
Rnds 12-17sc in each st around(8)

Note: Color change! On the last stitch of round 17, stop with 2 loops on the hook and pull the sunny yellow yarn through them. Carry on with sunny yellow from round 18. Tie the two tails together loosely on the inside.

RoundInstructionsStitches
Rnd 18sc in each st around(8)

Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.

Check: Yours should look like a stuffed piece about 0.6 in (1.5 cm) wide and 3.3 in (8.4 cm) tall, with an opening of 8 stitches left.

RoundInstructionsStitches
Rnd 19dec x4(4)

Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight, the hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.

Check: Done! Your bamboo stalk should now be a firmly stuffed, fully closed piece about 0.6 in (1.5 cm) wide and 3.5 in (9 cm) tall.

Sitting panda amigurumi: the finished bamboo stalk
The bamboo stalk, finished

Upper bamboo leaf

Worked in green.

Note: Ch 6. Make a slip knot and chain 6. That short chain is the spine of the oval, you'll crochet all the way around it.

RoundInstructionsStitches
Rnd 1sc 4, 3 sc in last ch, sc 4, 3 sc in skipped ch(14)

Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.

Check: Done! Your upper bamboo leaf should now be a flat oval about 1.2 in (3 cm) long and 0.9 in (2.2 cm) wide with a long yarn tail.

Sitting panda amigurumi: the finished upper bamboo leaf
The upper bamboo leaf, finished

Lower bamboo leaf

Worked in green.

Note: Ch 6. Make a slip knot and chain 6. That short chain is the spine of the oval, you'll crochet all the way around it.

RoundInstructionsStitches
Rnd 1sc 4, 3 sc in last ch, sc 4, 3 sc in skipped ch(14)

Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.

Check: Done! Your lower bamboo leaf should now be a flat oval about 1.2 in (3 cm) long and 0.9 in (2.2 cm) wide with a long yarn tail.

Sitting panda amigurumi: the finished lower bamboo leaf
The lower bamboo leaf, finished

Putting the bamboo together

Sitting panda crochet assembly: attach the upper bamboo leaf

1. Attach the upper bamboo leaf

Place it on the bamboo stalk at round 16, on the toy's left side. Hold one edge of the upper bamboo leaf against the bamboo stalk so the rest stands out, and sew along that edge only, back and forth, so it stays firm. It should end up pointing out and up, about 40 degrees from straight out.

Sitting panda crochet assembly: attach the lower bamboo leaf

2. Attach the lower bamboo leaf

Place it on the bamboo stalk at round 13, on the toy's left side. Hold one edge of the lower bamboo leaf against the bamboo stalk so the rest stands out, and sew along that edge only, back and forth, so it stays firm. It should end up pointing out and up, about 70 degrees from straight out.

Sitting panda crochet assembly: sew the lower bamboo node

3. Sew the lower bamboo node

With sunny yellow yarn on the bamboo stalk, around round 7, at the front, in the middle. How: small stitches, each one stitch long, one after another.

Sitting panda crochet assembly: sew the middle bamboo node

4. Sew the middle bamboo node

With sunny yellow yarn on the bamboo stalk, around round 12, at the front, in the middle. How: small stitches, each one stitch long, one after another.

Sitting panda crochet assembly: finish the bamboo stalk

5. Finish the bamboo stalk

Hide the tails on the bamboo stalk the same way you did on the toy. It isn't sewn on, it's its own little piece, so it never pulls the toy out of shape. Tuck it into the toy's arms or hands, or stand it right beside it, the way you like it best.

All done!

You did it! Your own little sitting panda is done and ready to hug, so feel proud of each stitch.

Made one? Share it with #crochetpirate. We'd love to see it.

Prefer paper?

The whole pattern as a printable PDF, free with a Crochet Pirate account. Sign in, and your download starts right away.

More patterns like this

Questions about this pattern

How big is this crochet panda?

About 6.5 in (17 cm) tall sitting, in DK (light worsted) cotton on a 3.5 mm (US E-4) hook. A thinner yarn with a smaller hook makes a smaller panda from the same rounds.

How are the panda's eye patches made?

Every eye patch is a little black oval made around a chain of 4, with 16 stitches around its edge. You put both on the head at round 13, poke the safety eyes through them into the head, and stitch around each patch while you can still get inside, before the head gets closed.

What is the bamboo stalk?

A small extra you make after the panda: a stuffed pea green tube 8 stitches round and about 3.5 in (9 cm) tall, with yellow ends, two little leaves and two yellow nodes stitched on. It isn't sewn on, so you can tuck it into the panda's arms or stand it beside it.

Is this panda pattern good for beginners?

It is marked intermediate: a head and body in two colors, eye patches with safety eyes, a muzzle, ears, arms, feet with pads and a tail, all sewn together, plus a little embroidery. The stitches are only single crochet, increases and decreases, and every round has its stitch count.

What yarn and hook do I need?

With a 3.5 mm (US E-4) hook and DK (light worsted) cotton, you'll want 6 colors: cream, black, gray, sunny yellow, pea green, and green. If you change your hook size up or down to keep the stitches tight, any yarn will do.

Can I sell what I make?

Yes, you're welcome to sell the toys you make from this pattern, and a mention of Crochet Pirate is appreciated. Please don't share or sell the pattern itself; link to this page instead.

Copyright 2026 Crochet Pirate. This pattern is free for personal use.

The Crochet Pirate app

Snap a photo. Get your own pattern.

Snap anything you love, like a pet, a mug or a drawing. Crochet Pirate designs it as an amigurumi, then walks you through every stitch with a picture at each checkpoint and a counter for your rounds.

Step 1: a photo of a small dog in a red bandana

Snap a photo

Step 2: the dog as a crochet toy, with the first rounds of its pattern

Get your pattern

Step 3: the finished crochet dog held in a hand

Crochet it