This free Tony Tony Chopper crochet pattern creates the small reindeer wearing his large blue hat, which has a pink brim and a white cross. It's an Advanced and big project that comes with 51 pieces, so having a few toys done before really helps. This is a fan-made pattern based on One Piece, and it isn't an official One Piece product.
At a glance
| Skill level | Advanced |
| Finished size | about 15.5 in (40 cm) tall |
| Yarn | worsted (aran) acrylic |
| Hook | 4 mm (US G-6) |
| Colors | Orange, White, Gray, Sky blue, Tan, Salmon pink, Cream, Caramel, Brown, Sunny yellow, Dark chocolate, Blue |
| Pieces | body, head in hat, eye white (left), eye white (right), face, hat brim half x2, hat ear flap x2, flap ring, emblem white ring, emblem pink disc, dot x16, antler prong x6, ear x2, arm x2, leg x2, tail, shirt stripe x2, shirt stripe 2 x2, shirt stripe 3 x2, shirt stripe 4 x2, cross arm x2 |
What you'll need
Yarn
worsted (aran): yarn weight 4, medium
- Orange: about 33 yd (30 m), 1 ball, 1.75 oz / 98 yd (50 g / 90 m)
- White: about 71 yd (65 m), 1 ball, 1.75 oz / 98 yd (50 g / 90 m)
- Gray: a small scrap
- Sky blue: about 186 yd (170 m), 2 balls, 1.75 oz / 98 yd (50 g / 90 m)
- Tan: about 93 yd (85 m), 1 ball, 1.75 oz / 98 yd (50 g / 90 m)
- Salmon pink: about 55 yd (50 m), 1 ball, 1.75 oz / 98 yd (50 g / 90 m)
- Cream: a small scrap
- Caramel: about 115 yd (105 m), 2 balls, 1.75 oz / 98 yd (50 g / 90 m)
- Brown: about 11 yd (10 m), 1 ball, 1.75 oz / 98 yd (50 g / 90 m)
- Sunny yellow: about 9 yd (8 m), 1 ball, 1.75 oz / 98 yd (50 g / 90 m)
- Dark chocolate: a small scrap
- Blue: a small scrap
Tools and notions
- 4 mm crochet hook: for worsted (aran) acrylic yarn
- 18 mm black safety eyes: 2
- Polyester toy stuffing: a couple of big handfuls
- Yarn needle (big eye, blunt tip)
- 1 stitch marker: a paperclip or scrap of yarn works too
- Scissors
Size and gauge
Tony Tony Chopper comes out about 15.5 in (40 cm) tall in this yarn, with a 4 mm (US G-6) hook: about 17 sc and 19 rounds to 4 in (10 cm). Gauge isn't critical: another yarn or hook only changes the size.
Abbreviations (US terms)
| Rnd | round, worked in a continuous spiral: don't join, move the stitch marker up each round |
| Row | worked back and forth: turn at the end of each row |
| sc | single crochet |
| inc | increase: 2 sc in the same stitch |
| dec | decrease: sc 2 stitches together (the invisible decrease looks neatest) |
| ch | chain |
| st(s) | stitch(es) |
| ( ) x6 | repeat what's in brackets 6 times |
| (12) | the stitches you have at the end of the round |
New to these? Our crochet abbreviations page shows how to work each one.
Good to know
- Crochet tightly so the stuffing doesn't show through. Seeing gaps? Go down a hook size.
- Work in a spiral and move your stitch marker up at the start of each round.
- Leave a long tail on every piece you'll sew on.
- Safety eyes and small parts can be a choking hazard for children under 3. For little ones, embroider the eyes instead.
Techniques in this pattern
New to one of these? Each tutorial shows it step by step, with photos.
- Magic ring: how the round pieces start
- Invisible decrease: smooth shaping without gaps
- Changing colors: clean lines between colors
- Safety eyes: where they go and how they lock
- Sewing the pieces together: neat seams that hide
- Reading the pattern: rounds, repeats and stitch counts

Rather follow pictures? Make Tony Tony Chopper in the app.
Crochet Pirate walks you through this pattern one step at a time: a picture at every checkpoint and a counter for your rounds.
Tony Tony Chopper crochet pattern
Make each piece in order, counting your stitches at the end of every round: the number in brackets is how many you should have.
Body
Worked in orange and white and gray.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x2, sc, inc x3 | (11) |
| Rnd 3 | sc, inc, sc, inc, sc, inc x2, sc, inc, sc, inc | (17) |
| Rnd 4 | sc 2, inc, sc 3, inc, sc 2, inc, sc 3, inc, sc 2, inc | (22) |
| Rnd 5 | sc 3, inc, sc 4, inc, sc 3, inc, sc 4, inc, sc 3, inc | (27) |
| Rnd 6 | sc 4, inc, sc 5, inc, sc 4, inc, sc 5, inc, sc 4, inc | (32) |
| Rnd 7 | sc 5, inc, sc 6, inc, sc 5, inc, sc 6, inc, sc 5, inc | (37) |
| Rnd 8 | sc 6, inc, sc 7, inc, sc 6, inc, sc 7, inc, sc 6, inc | (42) |
| Rnd 9 | sc 10, inc, sc 9, inc, sc 10, inc, sc 9, inc | (46) |
| Rnd 10 | sc 14, inc, sc 15, inc, sc 14, inc | (49) |
| Rnd 11 | sc 24, inc, sc 23, inc | (51) |
Check: Yours should look like an open cup about 3.7 in (9.5 cm) wide and 1.1 in (2.9 cm) deep, with 51 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnds 12-13 | sc 51 | (51) |
| Rnd 14 | sc 24, dec, sc 23, dec | (49) |
Note: Color change! On the last stitch of round 14, stop with 2 loops on the hook and pull the white yarn through them. Carry on with white from round 15. Tie the two tails together loosely on the inside.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 15 | sc 49 | (49) |
| Rnd 16 | sc 47, dec | (48) |
| Rnd 17 | sc 46, dec | (47) |
| Rnd 18 | sc 45, dec | (46) |
| Rnd 19 | sc 44, dec | (45) |
| Rnd 20 | inc, sc 20, dec x2, sc 20 | (44) |
Check: Yours should look like an open cup about 3.7 in (9.5 cm) wide and 3 in (7.6 cm) deep, with 44 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 21 | sc 20, dec, sc 20, dec | (42) |
| Rnd 22 | sc 12, dec, sc 12, dec, sc 12, dec | (39) |
| Rnd 23 | sc 8, dec, sc 8, dec, sc 7, dec, sc 8, dec | (35) |
| Rnd 24 | sc 7, dec, sc 7, dec, sc 6, dec, sc 7, dec | (31) |
| Rnd 25 | sc 6, dec, sc 6, dec, sc 5, dec, sc 6, dec | (27) |
Note: Color change! On the last stitch of round 25, stop with 2 loops on the hook and pull the gray yarn through them. Carry on with gray from round 26. Tie the two tails together loosely on the inside.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 26 | sc 3, dec, sc 4, dec, sc 3, dec, sc 4, dec, sc 3, dec | (22) |
| Rnd 27 | sc 4, dec, sc 3, dec, sc 4, dec, sc 3, dec | (18) |
| Rnd 28 | sc, dec, sc, dec, sc, dec, sc, dec, sc, dec, sc, dec | (12) |
Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.
Check: Yours should look like a stuffed piece about 4.1 in (10.5 cm) wide and 4.5 in (11.4 cm) tall, with an opening of 12 stitches left.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 29 | dec, sc, dec x2, sc, dec x2 | (7) |
Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight. The hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.
Check: Done! Your body should now be a firmly stuffed, fully closed piece about 4.1 in (10.5 cm) wide and 4.6 in (11.8 cm) tall.

Head in hat
Worked in sky blue.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x2, sc, inc x3 | (11) |
| Rnd 3 | sc, inc, sc, inc, sc, inc x2, sc, inc, sc, inc | (17) |
| Rnd 4 | sc 2, inc, sc 3, inc, sc 2, inc, sc 3, inc, sc 2, inc | (22) |
| Rnd 5 | sc 5, inc, sc 4, inc, sc 5, inc, sc 4, inc | (26) |
| Rnd 6 | sc 4, inc, sc 4, inc, sc 5, inc, sc 4, inc, sc 4, inc | (31) |
| Rnd 7 | sc 7, inc, sc 7, inc, sc 6, inc, sc 7, inc | (35) |
| Rnd 8 | sc 8, inc, sc 8, inc, sc 7, inc, sc 8, inc | (39) |
| Rnd 9 | sc 12, inc, sc 12, inc, sc 12, inc | (42) |
| Rnd 10 | sc 13, inc, sc 13, inc, sc 13, inc | (45) |
| Rnd 11 | sc 22, inc, sc 21, inc | (47) |
| Rnd 12 | sc 23, inc, sc 22, inc | (49) |
| Rnd 13 | sc 15, inc, sc 16, inc, sc 15, inc | (52) |
| Rnd 14 | sc 21, inc x4, sc 23, dec, sc 2 | (55) |
| Rnd 15 | sc 13, inc, sc 13, inc, sc 12, inc, sc 13, inc | (59) |
| Rnd 16 | sc 14, inc, sc 14, inc, sc 13, inc, sc 14, inc | (63) |
| Rnd 17 | sc 25, inc x5, sc 28, dec, sc 3 | (67) |
| Rnd 18 | sc 16, inc, sc 16, inc, sc 15, inc, sc 16, inc | (71) |
| Rnd 19 | sc 28, inc x6, sc 31, dec, sc 4 | (76) |
| Rnd 20 | sc 24, inc, sc 25, inc, sc 24, inc | (79) |
| Rnd 21 | sc 19, inc, sc 19, inc, sc 18, inc, sc 19, inc | (83) |
| Rnd 22 | sc 27, inc, sc 26, inc, sc 27, inc | (86) |
| Rnd 23 | sc 36, inc x3, sc 40, dec, sc 5 | (88) |
| Rnd 24 | sc 28, inc, sc 29, inc, sc 28, inc | (91) |
| Rnd 25 | sc 45, inc, sc 44, inc | (93) |
| Rnd 26 | sc 46, inc, sc 45, inc | (95) |
| Rnd 27 | sc 94, inc | (96) |
| Rnd 28 | sc 47, inc, sc 47, inc | (98) |
| Rnd 29 | sc 97, inc | (99) |
| Rnd 30 | sc 49, inc, sc 48, inc | (101) |
Check: Yours should look like an open cup about 7.5 in (18.9 cm) wide and 4.6 in (11.8 cm) deep, with 101 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 31 | sc 101 | (101) |
| Rnd 32 | sc 100, inc | (102) |
| Rnd 33 | sc 100, dec | (101) |
| Rnd 34 | sc 101 | (101) |
| Rnd 35 | sc 99, dec | (100) |
| Rnd 36 | sc 98, dec | (99) |
| Rnd 37 | sc 97, dec | (98) |
| Rnd 38 | sc 47, dec, sc 47, dec | (96) |
| Rnd 39 | sc 46, dec, sc 46, dec | (94) |
| Rnd 40 | sc 45, dec, sc 45, dec | (92) |
| Rnd 41 | sc 44, dec, sc 44, dec | (90) |
| Rnd 42 | sc 43, dec, sc 43, dec | (88) |
| Rnd 43 | sc 42, dec, sc 42, dec | (86) |
| Rnd 44 | sc 27, dec, sc 26, dec, sc 27, dec | (83) |
| Rnd 45 | sc 26, dec, sc 25, dec, sc 26, dec | (80) |
Check: Yours should look like an open cup about 7.5 in (19.1 cm) wide and 7.5 in (19.5 cm) deep, with 80 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 46 | sc 18, dec, sc 18, dec, sc 18, dec, sc 18, dec | (76) |
| Rnd 47 | sc 17, dec, sc 17, dec, sc 17, dec, sc 17, dec | (72) |
| Rnd 48 | sc 12, dec, sc 13, dec, sc 12, dec, sc 13, dec, sc 12, dec | (67) |
| Rnd 49 | sc 11, dec, sc 12, dec, sc 11, dec, sc 12, dec, sc 11, dec | (62) |
| Rnd 50 | sc 10, dec, sc 11, dec, sc 10, dec, sc 11, dec, sc 10, dec | (57) |
| Rnd 51 | sc 9, dec, sc 10, dec, sc 9, dec, sc 10, dec, sc 9, dec | (52) |
| Rnd 52 | sc 8, dec, sc 9, dec, sc 8, dec, sc 9, dec, sc 8, dec | (47) |
| Rnd 53 | sc 7, dec, sc 8, dec, sc 7, dec, sc 8, dec, sc 7, dec | (42) |
| Rnd 54 | sc 6, dec, sc 7, dec, sc 6, dec, sc 7, dec, sc 6, dec | (37) |
| Rnd 55 | sc 4, dec, sc 4, dec, sc 5, dec, sc 4, dec, sc 4, dec, sc 4, dec | (31) |
| Rnd 56 | sc 4, dec, sc 4, dec, sc 5, dec, sc 4, dec, sc 4, dec | (26) |
| Rnd 57 | sc 3, dec, sc 3, dec, sc 4, dec, sc 3, dec, sc 3, dec | (21) |
| Rnd 58 | sc 2, dec, sc, dec, sc 2, dec, sc, dec, sc 2, dec, sc, dec | (15) |
Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.
Check: Yours should look like a stuffed piece about 8.5 in (21.6 cm) wide and 10 in (24.8 cm) tall, with an opening of 15 stitches left.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 59 | sc, dec, sc, dec, sc, dec, sc, dec, sc, dec | (10) |
| Rnd 60 | sc, dec x2, sc, dec x2 | (6) |
Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight. The hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.
Check: Done! Your head in hat should now be a firmly stuffed, fully closed piece about 8.5 in (21.6 cm) wide and 10.5 in (26.1 cm) tall.

Eye white (left)
Worked in white.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
| Rnd 3 | sc, inc, sc, inc, sc, inc, sc, inc, sc, inc, sc, inc | (18) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing. Set it aside: it goes on the face while you make it, just before the eyes go in.
Check: Done! Your eye white (left) should now be a flat circle about 1.3 in (3.4 cm) across with a long yarn tail.

Eye white (right)
Worked in white.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
| Rnd 3 | sc, inc, sc, inc, sc, inc, sc, inc, sc, inc, sc, inc | (18) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing. Set it aside: it goes on the face while you make it, just before the eyes go in.
Check: Done! Your eye white (right) should now be a flat circle about 1.3 in (3.4 cm) across with a long yarn tail.

Face
Worked in tan.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x2, sc, inc x3 | (11) |
| Rnd 3 | sc, inc, sc, inc, sc, inc x2, sc, inc, sc, inc | (17) |
| Rnd 4 | sc 2, inc, sc 3, inc, sc 2, inc, sc 3, inc, sc 2, inc | (22) |
| Rnd 5 | sc 3, inc, sc 4, inc, sc 3, inc, sc 4, inc, sc 3, inc | (27) |
| Rnd 6 | sc 4, inc, sc 5, inc, sc 4, inc, sc 5, inc, sc 4, inc | (32) |
| Rnd 7 | sc 5, inc, sc 6, inc, sc 5, inc, sc 6, inc, sc 5, inc | (37) |
| Rnd 8 | sc 6, inc, sc 7, inc, sc 6, inc, sc 7, inc, sc 6, inc | (42) |
| Rnd 9 | sc 7, inc, sc 8, inc, sc 7, inc, sc 8, inc, sc 7, inc | (47) |
| Rnd 10 | sc 8, inc, sc 9, inc, sc 8, inc, sc 9, inc, sc 8, inc | (52) |
| Rnd 11 | sc 23, inc x5, sc 22, dec | (56) |
| Rnd 12 | inc x2, sc 25, dec, sc 25, inc x2 | (59) |
| Rnd 13 | sc 19, inc, sc 18, inc, sc 19, inc | (62) |
| Rnd 14 | sc 30, inc, sc 30, inc | (64) |
| Rnd 15 | sc 29, dec, sc 30, inc x2, sc | (65) |
Check: Yours should look like an open cup about 4.8 in (12.2 cm) wide and 1.7 in (4.4 cm) deep, with 65 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 16 | sc 28, dec x2, sc 30, inc x2, sc | (65) |
Note: Eye time. The face goes on first. Take the eye white (left) and eye white (right) you made earlier. Pin the eye white (left) on round 15, on the toy's left side and the eye white (right) on round 15, on the toy's right side. Push each safety eye through the middle of the eye white (right) and the eye white (left) and into the face between round 15 and round 16. Look at it from a distance, then snap the backs on inside: once they click, they stay forever. While you can still reach inside, sew around the edge of each eye white (left) and eye white (right) with its long tail, the bottom one first.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 17 | sc 65 | (65) |
| Rnd 18 | sc 63, dec | (64) |
| Rnd 19 | sc 64 | (64) |
| Rnd 20 | sc 62, dec | (63) |
Check: Yours should look like an open cup about 4.8 in (12.2 cm) wide and 2.8 in (7 cm) deep, with 63 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 21 | sc 27, dec x2, sc 29, inc, sc 2 | (62) |
| Rnd 22 | sc 14, dec, sc 13, dec, sc 14, dec, sc 13, dec | (58) |
| Rnd 23 | sc 10, dec, sc 9, dec, sc 10, dec, sc 9, dec, sc 10, dec | (53) |
| Rnd 24 | sc 9, dec, sc 8, dec, sc 9, dec, sc 8, dec, sc 9, dec | (48) |
| Rnd 25 | sc 14, dec, sc 14, dec, sc 14, dec | (45) |
Note: Slip stitch into the next stitch, then cut the yarn leaving a long tail (about 12 in / 30 cm). You'll sew the face on with it. Stuff it softly, pushing the stuffing to the end with the back of your hook.
Check: Done! Your face should now be an open piece about 5.5 in (13.9 cm) wide and 3.7 in (9.5 cm) long, with a long yarn tail.

Hat brim half (make 2)
Worked in salmon pink.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x2, sc, inc x3 | (11) |
| Rnd 3 | sc 2, inc, sc 2, inc, sc, inc, sc 2, inc | (15) |
| Rnd 4 | sc 4, inc, sc 4, inc, sc 4, inc | (18) |
| Rnd 5 | sc 8, inc, sc 8, inc | (20) |
Check: Yours should look like an open cup about 1.5 in (3.7 cm) wide and 0.6 in (1.6 cm) deep, with 20 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnds 6-8 | sc 20 | (20) |
| Rnd 9 | dec, sc 7, inc x2, sc 7, dec | (20) |
| Rnds 10-11 | sc 20 | (20) |
| Rnd 12 | dec, sc 7, inc x2, sc 7, dec | (20) |
| Rnd 13 | sc 20 | (20) |
| Rnd 14 | dec, sc 7, inc x2, sc 7, dec | (20) |
| Rnd 15 | sc 18, dec | (19) |
Check: Yours should look like an open cup about 1.5 in (3.7 cm) wide and 2.7 in (6.9 cm) deep, with 19 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnds 16-17 | sc 19 | (19) |
| Rnd 18 | dec x2, sc 7, inc, sc 7 | (18) |
| Rnds 19-20 | sc 18 | (18) |
| Rnd 21 | sc 16, dec | (17) |
| Rnd 22 | sc 7, dec, sc 6, dec | (15) |
Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.
Check: Yours should look like a stuffed piece about 1.7 in (4.3 cm) wide and 4.5 in (11.4 cm) tall, with an opening of 15 stitches left.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 23 | sc 2, dec, sc 2, dec, sc, dec, sc 2, dec | (11) |
| Rnd 24 | sc, dec, sc, dec x2, sc, dec | (7) |
Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight. The hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.
Check: Done! Your hat brim half should now be a firmly stuffed, fully closed piece about 1.7 in (4.3 cm) wide and 4.8 in (12.3 cm) tall.

Hat ear flap (make 2)
Worked in sky blue.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | sc, inc x2, sc, inc x2 | (10) |
| Rnd 3 | sc 2, inc, sc, inc, sc 2, inc, sc, inc | (14) |
| Rnd 4 | sc 13, inc | (15) |
Check: Yours should look like an open cup about 1.1 in (2.8 cm) wide and 0.5 in (1.3 cm) deep, with 15 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 5 | sc 15 | (15) |
| Rnd 6 | sc 13, dec | (14) |
| Rnds 7-8 | sc 14 | (14) |
| Rnd 9 | sc 12, dec | (13) |
| Rnd 10 | sc 13 | (13) |
Check: Yours should look like an open cup about 1.1 in (2.8 cm) wide and 1.8 in (4.5 cm) deep, with 13 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 11 | sc 11, dec | (12) |
| Rnds 12-13 | sc 12 | (12) |
Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.
Check: Yours should look like a stuffed piece about 1.3 in (3.2 cm) wide and 2.6 in (6.6 cm) tall, with an opening of 12 stitches left.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 14 | sc 10, dec | (11) |
| Rnd 15 | sc, dec, sc, dec x2, sc, dec | (7) |
Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight. The hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.
Check: Done! Your hat ear flap should now be a firmly stuffed, fully closed piece about 1.3 in (3.2 cm) wide and 3 in (7.7 cm) tall.

Flap ring
Worked in cream.
Note: Ch 4. Make a slip knot and chain 4. This is a strand: one row back along the chain and it's done.
| Round | Instructions | Stitches |
|---|---|---|
| Row 1 | sc 3 | (3) |
Note: Cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing, and pull it through the last loop.
Check: Done! Your flap ring should now be a flat strip about 0.7 in (1.8 cm) wide and 0.2 in (0.5 cm) tall with a long yarn tail.

Emblem white ring
Worked in white.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
| Rnd 3 | sc, inc, sc, inc, sc, inc, sc, inc, sc, inc, sc, inc | (18) |
| Rnd 4 | sc 2, inc, sc 2, inc, sc 2, inc, sc 2, inc, sc 2, inc, sc 2, inc | (24) |
| Rnd 5 | sc 3, inc, sc 3, inc, sc 3, inc, sc 3, inc, sc 3, inc, sc 3, inc | (30) |
| Rnd 6 | sc 4, inc, sc 4, inc, sc 4, inc, sc 4, inc, sc 4, inc, sc 4, inc | (36) |
| Rnd 7 | sc 5, inc, sc 5, inc, sc 5, inc, sc 5, inc, sc 5, inc, sc 5, inc | (42) |
Check: Yours should look like a flat circle about 3.1 in (7.9 cm) across, with 42 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 8 | sc 6, inc, sc 6, inc, sc 6, inc, sc 6, inc, sc 6, inc, sc 6, inc | (48) |
| Rnd 9 | sc 7, inc, sc 7, inc, sc 7, inc, sc 7, inc, sc 7, inc, sc 7, inc | (54) |
| Rnd 10 | sc 8, inc, sc 8, inc, sc 8, inc, sc 8, inc, sc 8, inc, sc 8, inc | (60) |
| Rnd 11 | sc 9, inc, sc 9, inc, sc 9, inc, sc 9, inc, sc 9, inc, sc 9, inc | (66) |
| Rnd 12 | sc 10, inc, sc 10, inc, sc 10, inc, sc 10, inc, sc 10, inc, sc 10, inc | (72) |
| Rnd 13 | sc 11, inc, sc 11, inc, sc 11, inc, sc 11, inc, sc 11, inc, sc 11, inc | (78) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.
Check: Done! Your emblem white ring should now be a flat circle about 5.5 in (14.6 cm) across with a long yarn tail.

Emblem pink disc
Worked in salmon pink.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
| Rnd 3 | sc, inc, sc, inc, sc, inc, sc, inc, sc, inc, sc, inc | (18) |
| Rnd 4 | sc 2, inc, sc 2, inc, sc 2, inc, sc 2, inc, sc 2, inc, sc 2, inc | (24) |
| Rnd 5 | sc 3, inc, sc 3, inc, sc 3, inc, sc 3, inc, sc 3, inc, sc 3, inc | (30) |
| Rnd 6 | sc 4, inc, sc 4, inc, sc 4, inc, sc 4, inc, sc 4, inc, sc 4, inc | (36) |
Check: Yours should look like a flat circle about 2.6 in (6.7 cm) across, with 36 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 7 | sc 5, inc, sc 5, inc, sc 5, inc, sc 5, inc, sc 5, inc, sc 5, inc | (42) |
| Rnd 8 | sc 6, inc, sc 6, inc, sc 6, inc, sc 6, inc, sc 6, inc, sc 6, inc | (48) |
| Rnd 9 | sc 7, inc, sc 7, inc, sc 7, inc, sc 7, inc, sc 7, inc, sc 7, inc | (54) |
| Rnd 10 | sc 8, inc, sc 8, inc, sc 8, inc, sc 8, inc, sc 8, inc, sc 8, inc | (60) |
| Rnd 11 | sc 9, inc, sc 9, inc, sc 9, inc, sc 9, inc, sc 9, inc, sc 9, inc | (66) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.
Check: Done! Your emblem pink disc should now be a flat circle about 4.9 in (12.4 cm) across with a long yarn tail.

Dot (make 16)
Worked in white.
Note: Ch 3. Make a slip knot and chain 3. That short chain is the spine of the oval. You'll crochet all the way around it.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | sc, 3 sc in last ch, sc, 3 sc in skipped ch | (8) |
| Rnd 2 | inc, sc, inc, inc, inc, sc, inc, inc | (14) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.
Check: Done! Your dot should now be a flat oval about 1.1 in (2.8 cm) long and 1 in (2.6 cm) wide with a long yarn tail.

Antler prong (make 6)
Worked in caramel.
Note: Ch 6. Make a slip knot and chain 6. That short chain is the spine of the oval. You'll crochet all the way around it.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | sc 4, 3 sc in last ch, sc 4, 3 sc in skipped ch | (14) |
| Rnd 2 | sc 6, inc, sc 6, inc | (16) |
Check: Yours should look like a small flat oval with 16 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 3 | sc 16 | (16) |
| Rnd 4 | sc 7, inc, sc 7, inc | (18) |
| Rnd 5 | sc 8, inc, sc 8, inc | (20) |
| Rnds 6-7 | sc 20 | (20) |
| Rnd 8 | sc 9, inc, sc 9, inc | (22) |
| Rnds 9-13 | sc 22 | (22) |
Check: Yours should look like an open cup about 1.6 in (4.1 cm) wide and 2.5 in (6.3 cm) deep, with 22 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnds 14-15 | sc 22 | (22) |
| Rnd 16 | sc 9, dec, sc 9, dec | (20) |
| Rnds 17-18 | sc 20 | (20) |
| Rnd 19 | sc 8, dec, sc 8, dec | (18) |
| Rnd 20 | sc 18 | (18) |
| Rnd 21 | sc 7, dec, sc 7, dec | (16) |
| Rnd 22 | sc 6, dec, sc 6, dec | (14) |
Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.
Check: Yours should look like a stuffed piece about 1.9 in (4.7 cm) wide and 4.8 in (12.1 cm) tall, with an opening of 14 stitches left.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 23 | sc 2, dec, sc, dec, sc 2, dec, sc, dec | (10) |
| Rnd 24 | sc, dec x2, sc, dec x2 | (6) |
Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight. The hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.
Check: Done! Your antler prong should now be a firmly stuffed, fully closed piece about 1.9 in (4.7 cm) wide and 5 in (13.1 cm) tall.

Ear (make 2)
Worked in tan.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | sc, inc x2, sc, inc x2 | (10) |
| Rnd 3 | sc 2, inc, sc 3, inc, sc 2, inc | (13) |
Check: Yours should look like an open cup about 0.9 in (2.4 cm) wide and 0.3 in (0.8 cm) deep, with 13 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 4 | sc 13 | (13) |
| Rnd 5 | sc 12, inc | (14) |
| Rnd 6 | sc 14 | (14) |
| Rnd 7 | sc 13, inc | (15) |
| Rnd 8 | sc 15 | (15) |
Note: Slip stitch into the next stitch, then cut the yarn leaving a long tail (about 12 in / 30 cm). You'll sew the ear on with it. Stuff it softly, pushing the stuffing to the end with the back of your hook.
Check: Done! Your ear should now be an open piece about 1.3 in (3.2 cm) wide and 1.5 in (3.8 cm) long, with a long yarn tail.

Arm (make 2)
Worked in tan and brown.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | sc, inc x2, sc, inc x2 | (10) |
| Rnd 3 | sc 2, inc, sc, inc, sc 2, inc, sc, inc | (14) |
| Rnd 4 | sc 6, inc, sc 6, inc | (16) |
| Rnd 5 | sc 15, inc | (17) |
Check: Yours should look like an open cup about 1.3 in (3.2 cm) wide and 0.7 in (1.8 cm) deep, with 17 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 6 | sc 17 | (17) |
| Rnd 7 | sc 16, inc | (18) |
| Rnds 8-9 | sc 18 | (18) |
| Rnd 10 | sc 17, inc | (19) |
| Rnd 11 | sc 19 | (19) |
Note: Color change! On the last stitch of round 11, stop with 2 loops on the hook and pull the brown yarn through them. Carry on with brown from round 12. Tie the two tails together loosely on the inside.
Check: Yours should look like an open cup about 1.4 in (3.6 cm) wide and 2 in (5 cm) deep, with 19 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnds 12-13 | sc 19 | (19) |
| Rnd 14 | sc 8, dec, sc 7, dec | (17) |
| Rnd 15 | sc 4, dec, sc 3, dec, sc 4, dec | (14) |
Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.
Check: Yours should look like a stuffed piece about 1.6 in (4.1 cm) wide and 3 in (7.5 cm) tall, with an opening of 14 stitches left.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 16 | sc 2, dec, sc, dec, sc 2, dec, sc, dec | (10) |
| Rnd 17 | sc, dec x2, sc, dec x2 | (6) |
Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight. The hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.
Check: Done! Your arm should now be a firmly stuffed, fully closed piece about 1.6 in (4.1 cm) wide and 3.3 in (8.4 cm) tall.

Leg (make 2)
Worked in orange and tan and brown.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x2, sc, inc x3 | (11) |
| Rnd 3 | sc, inc, sc, inc, sc 2, inc, sc, inc, sc, inc | (16) |
| Rnd 4 | sc 4, inc, sc 5, inc, sc 4, inc | (19) |
| Rnd 5 | sc 5, inc, sc 6, inc, sc 5, inc | (22) |
| Rnd 6 | sc 21, inc | (23) |
Check: Yours should look like an open cup about 1.7 in (4.3 cm) wide and 0.8 in (2 cm) deep, with 23 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 7 | sc 23 | (23) |
Note: Color change! On the last stitch of round 7, stop with 2 loops on the hook and pull the tan yarn through them. Carry on with tan from round 8. Tie the two tails together loosely on the inside.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 8 | sc 21, dec | (22) |
| Rnds 9-10 | sc 22 | (22) |
| Rnd 11 | dec, sc 9, inc, sc 8, dec | (21) |
Check: Yours should look like an open cup about 1.7 in (4.3 cm) wide and 1.8 in (4.6 cm) deep, with 21 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 12 | sc 21 | (21) |
| Rnd 13 | sc 3, inc, sc 6, dec x4, sc 3 | (18) |
Note: Color change! On the last stitch of round 13, stop with 2 loops on the hook and pull the brown yarn through them. Carry on with brown from round 14. Tie the two tails together loosely on the inside.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 14 | sc 4, dec, sc 4, dec, sc 4, dec | (15) |
Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.
Check: Yours should look like a stuffed piece about 1.9 in (4.9 cm) wide and 2.5 in (6.4 cm) tall, with an opening of 15 stitches left.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 15 | sc, dec, sc, dec, sc, dec, sc, dec, sc, dec | (10) |
| Rnd 16 | sc, dec x2, sc, dec x2 | (6) |
Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight. The hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.
Check: Done! Your leg should now be a firmly stuffed, fully closed piece about 1.9 in (4.9 cm) wide and 2.9 in (7.3 cm) tall.

Tail
Worked in tan.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x2, sc, inc x3 | (11) |
| Rnd 3 | sc 3, inc, sc 2, inc, sc 3, inc | (14) |
Check: Yours should look like an open cup about 1 in (2.6 cm) wide and 0.3 in (0.7 cm) deep, with 14 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 4 | sc 5, dec, sc 5, dec | (12) |
Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.
Check: Yours should look like a stuffed piece about 1.2 in (3 cm) wide and 0.5 in (1.2 cm) tall, with an opening of 12 stitches left.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 5 | sc, dec, sc, dec, sc, dec, sc, dec | (8) |
Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight. The hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.
Check: Done! Your tail should now be a firmly stuffed, fully closed piece about 1 in (2.5 cm) wide and 0.9 in (2.3 cm) tall.

Shirt stripe (make 2)
Worked in sunny yellow.
Note: Ch 5. Make a slip knot and chain 5. This piece is flat: you crochet back and forth along that chain in rows, turning at the end of each one.
| Round | Instructions | Stitches |
|---|---|---|
| Row 1 | sc 4 | (4) |
| Rows 2-3 | ch 1, turn, sc 4 | (4) |
Check: Yours should look like a flat rectangle about 0.9 in (2.4 cm) wide and 0.6 in (1.6 cm) tall, 4 stitches across its last row.
| Round | Instructions | Stitches |
|---|---|---|
| Rows 4-5 | ch 1, turn, sc 4 | (4) |
Note: Cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing, and pull it through the last loop.
Check: Done! Your shirt stripe should now be a flat rectangle about 0.9 in (2.4 cm) wide and 1.1 in (2.7 cm) tall with a long yarn tail.

Shirt stripe 2 (make 2)
Worked in sunny yellow.
Note: Ch 5. Make a slip knot and chain 5. This piece is flat: you crochet back and forth along that chain in rows, turning at the end of each one.
| Round | Instructions | Stitches |
|---|---|---|
| Row 1 | sc 4 | (4) |
| Rows 2-3 | ch 1, turn, sc 4 | (4) |
Check: Yours should look like a flat rectangle about 0.9 in (2.4 cm) wide and 0.6 in (1.6 cm) tall, 4 stitches across its last row.
| Round | Instructions | Stitches |
|---|---|---|
| Rows 4-5 | ch 1, turn, sc 4 | (4) |
Note: Cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing, and pull it through the last loop.
Check: Done! Your shirt stripe 2 should now be a flat rectangle about 0.9 in (2.4 cm) wide and 1.1 in (2.7 cm) tall with a long yarn tail.

Shirt stripe 3 (make 2)
Worked in sunny yellow.
Note: Ch 5. Make a slip knot and chain 5. This piece is flat: you crochet back and forth along that chain in rows, turning at the end of each one.
| Round | Instructions | Stitches |
|---|---|---|
| Row 1 | sc 4 | (4) |
| Rows 2-3 | ch 1, turn, sc 4 | (4) |
Check: Yours should look like a flat rectangle about 0.9 in (2.4 cm) wide and 0.6 in (1.6 cm) tall, 4 stitches across its last row.
| Round | Instructions | Stitches |
|---|---|---|
| Rows 4-5 | ch 1, turn, sc 4 | (4) |
Note: Cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing, and pull it through the last loop.
Check: Done! Your shirt stripe 3 should now be a flat rectangle about 0.9 in (2.4 cm) wide and 1.1 in (2.7 cm) tall with a long yarn tail.

Shirt stripe 4 (make 2)
Worked in sunny yellow.
Note: Ch 5. Make a slip knot and chain 5. This piece is flat: you crochet back and forth along that chain in rows, turning at the end of each one.
| Round | Instructions | Stitches |
|---|---|---|
| Row 1 | sc 4 | (4) |
| Rows 2-3 | ch 1, turn, sc 4 | (4) |
Check: Yours should look like a flat rectangle about 0.9 in (2.4 cm) wide and 0.6 in (1.6 cm) tall, 4 stitches across its last row.
| Round | Instructions | Stitches |
|---|---|---|
| Rows 4-5 | ch 1, turn, sc 4 | (4) |
Note: Cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing, and pull it through the last loop.
Check: Done! Your shirt stripe 4 should now be a flat rectangle about 0.9 in (2.4 cm) wide and 1.1 in (2.7 cm) tall with a long yarn tail.

Cross arm (make 2)
Worked in white.
Note: Ch 10. Make a slip knot and chain 10. That short chain is the spine of the oval. You'll crochet all the way around it.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | sc 8, 3 sc in last ch, sc 8, 3 sc in skipped ch | (22) |
| Rnd 2 | sc 3, inc, sc 2, inc, sc 3, inc, sc 3, inc, sc 2, inc, sc 3, inc | (28) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.
Check: Done! Your cross arm should now be a flat oval about 2.8 in (7 cm) long and 2 in (5.2 cm) wide with a long yarn tail.

Putting Tony Tony Chopper together
All your pieces are ready, so take your time and let's sew them together one by one until your reindeer appears.

1. Attach the face
Place it on the head in hat at round 16, at the front, a little toward the top. Hold the open edge flat against the head in hat and pin it all round. Using the long tail, sew all the way around the edge: under one stitch of the face, then under the head in hat right next to it. Add a last bit of stuffing just before the gap closes. It should end up pointing out and down, about 24 degrees from straight out.

2. Attach the hat brim halves
There are 2, each with its own place. The picture shows them all. One on the head in hat at round 31, at the front, in the middle; the other on the head in hat at round 31, at the front, in the middle. Pin them all first, then for each one: hold the starting end of the hat brim half (where the magic ring is) against the head in hat and sew around where they touch, going back and forth, then pull the yarn snug so there's no gap. It should end up lying along it, pointing toward the toy's left.

3. Attach the flap ring
Place it right on the end of the hat ear flap (its last round, 15), centered. Sew the starting end of the flap ring (the end with the slip knot) to the hat ear flap with its yarn tail (a few firm stitches through that end only) and let the rest run free.

4. Attach the hat ear flaps
There are 2, each with its own place. The picture shows them all. One on the head in hat at round 20, on the toy's left side, a little toward the front; the other on the head in hat at round 20, on the toy's right side, a little toward the front. Pin them all first, then for each one: hold the starting end of the hat ear flap (where the magic ring is) against the head in hat and sew around where they touch, going back and forth, then pull the yarn snug so there's no gap. It should end up lying along it, pointing down.

5. Attach the emblem white ring
Place it on the head in hat at round 36, at the front, in the middle. Pin the flat emblem white ring flat on the head in hat, and sew around its edge with the long tail, catching the head in hat underneath with every stitch. It will curve to follow the head in hat. That's what you want.

6. Attach the cross arms
There are 2, each with its own place. The picture shows them all. One on the emblem pink disc at round 3, on top; the other on the emblem pink disc at round 3, on top. Pin them all first, then for each one: pin the flat cross arm flat on the emblem pink disc, its long side running toward the toy's left, and sew around its edge with the long tail, catching the emblem pink disc underneath with every stitch. It will curve to follow the emblem pink disc. That's what you want.

7. Attach the emblem pink disc
Place it on the head in hat at round 36, at the front, in the middle. Pin the flat emblem pink disc flat on the head in hat, and sew around its edge with the long tail, catching the head in hat underneath with every stitch. It will curve to follow the head in hat. That's what you want.

8. Attach the dots
There are 16, each with its own place. The picture shows them all. The first one goes on the head in hat at round 50, on the toy's left side, halfway toward the front, the others near it, each where the picture has it. Pin them all first, then for each one: pin the flat dot flat on the head in hat, its long side running backward, and sew around its edge with the long tail, catching the head in hat underneath with every stitch. It will curve to follow the head in hat. That's what you want.

9. Attach the antler prongs
There are 6, each with its own place. The picture shows them all. The first one goes on the head in hat at round 29, on the toy's left side, the others near it, each where the picture has it. Pin them all first, then for each one: hold the starting end of the antler prong (where the magic ring is) against the head in hat and sew around where they touch, going back and forth, then pull the yarn snug so there's no gap. It should end up lying along it, pointing up.

10. Attach the ears
There are 2, each with its own place. The picture shows them all. One on the head in hat at round 26, on the toy's left side; the other on the head in hat at round 26, on the toy's right side. Pin them all first, then for each one: hold the open edge flat against the head in hat and pin it all round. Using the long tail, sew all the way around the edge: under one stitch of the ear, then under the head in hat right next to it. Add a last bit of stuffing just before the gap closes. It should end up pointing straight out.

11. Attach the head in hat
Place it on the body at round 28, at the back, in the middle. Hold the starting end of the head in hat (where the magic ring is) against the body and sew around where they touch, going back and forth, then pull the yarn snug so there's no gap. It should end up pointing out and up, about 74 degrees from straight out.

12. Attach the arms
Place the first one on the body at round 22, on the toy's left side. Hold the starting end of the arm (where the magic ring is) against the body and sew around where they touch, going back and forth, then pull the yarn snug so there's no gap. It should end up pointing out and down, about 57 degrees from straight out. Then do the same for the other one on the other side, mirrored.

13. Attach the legs
Place the first one on the body at round 6, on the toy's left side. Hold the starting end of the leg (where the magic ring is) against the body and sew around where they touch, going back and forth, then pull the yarn snug so there's no gap. It should end up lying along it, pointing down. Then do the same for the other one on the other side, mirrored.

14. Attach the tail
Place it on the body at round 11, at the back, in the middle. Hold the starting end of the tail (where the magic ring is) against the body and sew around where they touch, going back and forth, then pull the yarn snug so there's no gap. It should end up pointing straight out.

15. Attach the shirt stripes
Place the first one on the body at round 16, at the front, halfway toward the toy's left. Pin the flat shirt stripe flat on the body, and sew around its edge with the long tail, catching the body underneath with every stitch. It will curve to follow the body. That's what you want. Then do the same for the other one on the other side, mirrored.

16. Attach the second shirt stripes
Place the first one on the body at round 20, at the front, halfway toward the toy's left. Pin the flat shirt stripe 2 flat on the body, and sew around its edge with the long tail, catching the body underneath with every stitch. It will curve to follow the body. That's what you want. Then do the same for the other one on the other side, mirrored.

17. Attach the third shirt stripes
Place the first one on the body at round 16, at the back, a little toward the toy's left. Pin the flat shirt stripe 3 flat on the body, and sew around its edge with the long tail, catching the body underneath with every stitch. It will curve to follow the body. That's what you want. Then do the same for the other one on the other side, mirrored.

18. Attach the fourth shirt stripes
Place the first one on the body at round 20, at the back, halfway toward the toy's left. Pin the flat shirt stripe 4 flat on the body, and sew around its edge with the long tail, catching the body underneath with every stitch. It will curve to follow the body. That's what you want. Then do the same for the other one on the other side, mirrored.

19. Sew the angry eyebrows
With dark chocolate yarn on the face, in these spots: around round 15, at the front, a little to the toy's left; around round 15, at the front, a little to the toy's right. How: small stitches one after another, going up the rounds. One stitch per round.

20. Sew the nose
With blue yarn on the face, around round 1, at the back, in the middle. How: make 4 or 5 stitches on top of each other over the same 2 stitches until it looks nice and plump.

21. Sew the line under nose
With dark chocolate yarn on the face, around round 4, at the back, in the middle. How: small stitches one after another, going up the rounds. One stitch per round.

22. Sew the frowning mouth
With dark chocolate yarn on the face, around round 5, at the back, in the middle. How: come up at one corner, go down 3 stitches along, then catch the middle of that long stitch and pull it down one round to make a curve.

23. Hide the tails
For every loose tail: thread it on the needle, poke it into the toy and out somewhere else, give it a little tug, and snip it close. The end disappears inside. All done!
All done!
You did it! Your little reindeer is finished, big hat and all, and you made every bit of it with your own hands.
Made one? Share it with #crochetpirate. We'd love to see it.
Prefer paper?
The whole pattern as a printable PDF, free with a Crochet Pirate account. Sign in, and your download starts right away.
More patterns like this
- Totoro crochet pattern (Intermediate)
- Fox crochet pattern (Intermediate)
- Pink axolotl crochet pattern (Intermediate)
- Yellow snail crochet pattern (Intermediate)
Questions about this pattern
Is this an official One Piece pattern?
No. It's a fan-made pattern inspired by Tony Tony Chopper, the reindeer doctor from Eiichiro Oda's One Piece. It's free, meant for your own use and for gifts, and it isn't affiliated with or endorsed by Eiichiro Oda, Shueisha or Toei Animation.
How is Chopper's hat made?
The hat and the head are one big sky blue ball of 60 rounds that grows to 102 stitches. The tan face is a cup of 25 rounds sewn on its front. The brim is two stuffed salmon pink tubes, and the two ear flaps hang at the sides. The emblem is a pink disc of 11 rounds on a white disc of 13 rounds, with a cross of two white bars on top. Sixteen small white dots go on last.
How are Chopper's antlers made?
Every antler is three caramel prongs, so you'll make six total. A prong begins with a short chain, goes for 24 rounds, and at its widest it's 22 stitches around. Stuff each prong, close it up, then sew its starting end onto the hat. The first one sits at round 29 on the toy's left side, and the rest go beside it, just like the picture shows.
How much yarn does Chopper take?
You'll need roughly 186 yd (170 m) of sky blue worsted yarn for the hat and ear flaps. For the antlers, 115 yd (105 m) of caramel, and 93 yd (85 m) of tan. White takes 71 yd (65 m), salmon pink 55 yd (50 m), orange 33 yd (30 m), brown 11 yd (10 m), and yellow 9 yd (8 m). Also grab scraps of gray, cream, dark chocolate and blue. Then add two 18 mm safety eyes and lots of toy stuffing.
How big is the finished Tony Tony Chopper?
Tony Tony Chopper ends up around 15.5 in (40 cm) tall when you use worsted (aran) yarn and a 4 mm (US G-6) hook. If you grab a thicker yarn and a bigger hook, you get a bigger toy; the rounds don't change.
What yarn and hook do I need?
Worsted (aran) acrylic with a 4 mm (US G-6) hook, in 12 colors: orange, white, gray, sky blue, tan, salmon pink, cream, caramel, brown, sunny yellow, dark chocolate, blue. Any yarn works if you go up or down a hook size to keep the stitches tight.
Is this pattern good for beginners?
It's marked Advanced: lots of pieces and careful assembly. Take it one piece at a time, every round has its stitch count and a photo to check against.
Can I sell what I make?
This is a fan-made pattern of a character that belongs to its creators, so the toys you make from it are for you and for gifts, not for selling. Please don't share or sell the pattern itself; link to this page instead.
Copyright 2026 Crochet Pirate. This pattern is free for personal use.





