Take a picture of any toy, and you'll get a crochet pattern that's all yours. Make yours in the app

Home > Free Patterns > Animals > Sea Creatures > Crochet Fish Pattern: Free Amigurumi Goldfish
Goldfish free amigurumi crochet pattern, with two more pictures of the finished toy
Free crochet pattern

Crochet Fish Pattern: Free Amigurumi Goldfish

Free Goldfish amigurumi crochet pattern: easy, about 5.5 in (14 cm) tall in DK (light worsted) yarn. Every round with its stitch count, photos and a PDF.

What you see is what you make

Not made up by AI: every pattern picture (the toy, each piece, each step) starts as a 3D render of this pattern's own stitches from our crochet engine. An image model turns each render into the photo you see, and the shape is checked against the render.

Hi there! You're going to crochet a plump little orange fish with big sweet eyes, and no prior skills are needed. We'll take it slow, one tiny step at a time, and each stitch you work matters.

At a glance

Skill levelEasy
Finished sizeabout 5.5 in (14 cm) tall
YarnDK (light worsted) cotton
Hook3.5 mm (US E-4)
ColorsCream, White, Orange, Peach, Black, Terracotta
Piecescream belly and chin patch, eye white x2, body, side fin x2, tail fan x2, dorsal fin

What you'll need

Yarn

DK (light worsted): yarn weight 3, light

  • Cream: about 14 yd (13 m), 1 ball, 1.75 oz / 137 yd (50 g / 125 m)
  • White: a small scrap
  • Orange: about 115 yd (105 m), 1 ball, 1.75 oz / 137 yd (50 g / 125 m)
  • Peach: a small scrap
  • Black: a small scrap
  • Terracotta: a small scrap

Tools and notions

  • 3.5 mm crochet hook: for DK (light worsted) cotton yarn
  • 18 mm black safety eyes: 1
  • Polyester toy stuffing: a couple of big handfuls
  • Yarn needle (big eye, blunt tip)
  • 1 stitch marker: a paperclip or scrap of yarn works too
  • Scissors

Size and gauge

When you use this yarn and a 3.5 mm (US E-4) hook, Goldfish ends up around 5.5 in (14 cm) tall. That's about 20 sc and 22 rounds per 4 in (10 cm). Gauge doesn't really matter here: if you pick a different yarn or hook, only the size will change.

Abbreviations (US terms)

Rndround, worked in a continuous spiral: don't join, move the stitch marker up each round
scsingle crochet
incincrease: 2 sc in the same stitch
decdecrease: sc 2 stitches together (the invisible decrease looks neatest)
chchain
st(s)stitch(es)
( ) x6repeat what's in brackets 6 times
(12)the stitches you have at the end of the round

New to these? Our crochet abbreviations page shows how to work each one.

Good to know

  • Crochet tightly so the stuffing doesn't show through. Seeing gaps? Go down a hook size.
  • Work in a spiral and move your stitch marker up at the start of each round.
  • Leave a long tail on every piece you'll sew on.
  • Safety eyes and small parts can be a choking hazard for children under 3. For little ones, embroider the eyes instead.

Techniques in this pattern

New to one of these? Each tutorial shows it step by step, with photos.

All the crocheted pieces of the Goldfish amigurumi, laid out
The pieces you'll make: cream belly and chin patch, eye white (2), body, side fin (2), tail fan (2), dorsal fin.

Rather follow pictures? Make the goldfish in the app.

Crochet Pirate walks you through this pattern one step at a time: a picture at every checkpoint and a counter for your rounds.

Goldfish crochet pattern

Make each piece in order, counting your stitches at the end of every round: the number in brackets is how many you should have.

Cream belly and chin patch

Worked in cream.

Note: Ch 16. Make a slip knot and chain 16. That short chain is the spine of the oval, you'll crochet all the way around it.

RoundInstructionsStitches
Rnd 1sc 14, 3 sc in last ch, sc 14, 3 sc in skipped ch(34)
Rnd 2sc 14, inc x3, sc 14, inc x3(40)
Rnd 3sc 14, (sc, inc) x3, sc 14, (sc, inc) x3(46)
Rnd 4sc 14, (sc 2, inc) x3, sc 14, (sc 2, inc) x3(52)

Check: Yours should look like a small flat oval with 52 stitches around the edge.

RoundInstructionsStitches
Rnd 5sc 14, (sc 3, inc) x3, sc 14, (sc 3, inc) x3(58)
Rnd 6sc 14, (sc 4, inc) x3, sc 14, (sc 4, inc) x3(64)
Rnd 7sc 14, (sc 5, inc) x3, sc 14, (sc 5, inc) x3(70)

Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing. Set it aside: it goes on the body while you make it, just before the eyes go in.

Check: Done! Your cream belly and chin patch should now be a flat oval about 5.5 in (13.7 cm) long and 4.4 in (11.1 cm) wide with a long yarn tail.

Goldfish amigurumi: the finished cream belly and chin patch
The cream belly and chin patch, finished

Eye white (make 2)

Worked in white.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)
Rnd 3(sc, inc) x6(18)

Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing. Set it aside: it goes on the body while you make it, just before the eyes go in.

Check: Done! Your eye white should now be a flat circle about 1.1 in (2.9 cm) across with a long yarn tail.

Goldfish amigurumi: the finished eye white
The eye white, finished

Body

Worked in orange.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)
Rnd 3(sc, inc) x6(18)
Rnd 4(sc 2, inc) x6(24)
Rnd 5(sc 3, inc) x6(30)
Rnd 6(sc 4, inc) x6(36)
Rnd 7(sc 5, inc) x6(42)
Rnd 8(sc 6, inc) x6(48)
Rnd 9(sc 7, inc) x6(54)
Rnd 10(sc 8, inc) x6(60)
Rnd 11(sc 9, inc) x6(66)
Rnd 12(sc 10, inc) x6(72)

Check: Yours should look like a flat circle about 4.5 in (11.5 cm) across, with 72 stitches around the edge.

RoundInstructionsStitches
Rnds 13-21sc in each st around(72)

Note: Eye time, the face goes on first. Take the cream belly and chin patch and eye whites you made earlier. Pin the cream belly and chin patch on round 10, at the front, in the middle and the eye whites on round 19, one on each side of the front. Push each safety eye through the eye white and the cream belly and chin patch and into the body between round 20 and round 21. Look at it from a distance, then snap the backs on inside: once they click, they stay forever. While you can still reach inside, sew around the edge of each cream belly and chin patch and eye white with its long tail, the bottom one first.

RoundInstructionsStitches
Rnds 22-25sc in each st around(72)

Check: Yours should look like an open cup about 4.5 in (11.5 cm) wide and 2.3 in (5.9 cm) deep, with 72 stitches around the edge.

RoundInstructionsStitches
Rnd 26sc in each st around(72)
Rnd 27(sc 10, dec) x6(66)
Rnd 28(sc 9, dec) x6(60)
Rnd 29(sc 8, dec) x6(54)
Rnd 30(sc 7, dec) x6(48)
Rnd 31(sc 6, dec) x6(42)
Rnd 32(sc 5, dec) x6(36)
Rnd 33(sc 4, dec) x6(30)
Rnd 34(sc 3, dec) x6(24)

Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.

Check: Yours should look like a stuffed piece about 5 in (13.1 cm) wide and 4.2 in (10.6 cm) tall, with an opening of 24 stitches left.

RoundInstructionsStitches
Rnd 35(sc 2, dec) x6(18)
Rnd 36(sc, dec) x6(12)
Rnd 37dec x6(6)

Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight, the hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.

Check: Done! Your body should now be a firmly stuffed, fully closed piece about 4.8 in (12.2 cm) wide and 4.8 in (12.1 cm) tall.

Goldfish amigurumi: the finished body
The body, finished

Side fin (make 2)

Worked in orange.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)
Rnd 3(sc, inc) x6(18)

Check: Yours should look like a flat circle about 1.1 in (2.9 cm) across, with 18 stitches around the edge.

RoundInstructionsStitches
Rnds 4-6sc in each st around(18)
Rnd 7(sc 4, dec) x3(15)
Rnd 8(sc 3, dec) x3(12)

Note: Press the opening flat, with the stitches of the two layers lined up. Crochet across through both layers, 6 sc, one through each pair of stitches, to close it in a straight seam. Cut the yarn leaving a long tail (about 12 in / 30 cm), you'll sew the side fin on along this seam.

Check: Done! Your side fin should now be a flat double layer about 1.3 in (3.3 cm) wide and 1.3 in (3.3 cm) long (pressed flat, not stuffed) with a straight seam at its end and a long yarn tail.

Goldfish amigurumi: the finished side fin
The side fin, finished

Tail fan (make 2)

Worked in orange.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)
Rnd 3(sc, inc) x6(18)
Rnd 4(sc 2, inc) x6(24)
Rnd 5(sc 5, inc) x4(28)
Rnd 6(sc 6, inc) x4(32)

Check: Yours should look like an open cup about 2 in (5.1 cm) wide and 0.2 in (0.6 cm) deep, with 32 stitches around the edge.

RoundInstructionsStitches
Rnds 7-8sc in each st around(32)
Rnd 9(sc 14, dec) x2(30)
Rnd 10(sc 13, dec) x2(28)
Rnd 11(sc 12, dec) x2(26)

Check: Yours should look like an open cup about 2 in (5.1 cm) wide and 1.1 in (2.8 cm) deep, with 26 stitches around the edge.

RoundInstructionsStitches
Rnd 12(sc 11, dec) x2(24)
Rnd 13(sc 10, dec) x2(22)
Rnd 14(sc 9, dec) x2(20)
Rnd 15(sc 8, dec) x2(18)
Rnd 16(sc 7, dec) x2(16)

Note: Press the opening flat, with the stitches of the two layers lined up. Crochet across through both layers, 8 sc, one through each pair of stitches, to close it in a straight seam. Cut the yarn leaving a long tail (about 12 in / 30 cm), you'll sew the tail fan on along this seam.

Check: Done! Your tail fan should now be a flat double layer about 2.2 in (5.6 cm) wide and 2.7 in (6.8 cm) long (pressed flat, not stuffed) with a straight seam at its end and a long yarn tail.

Goldfish amigurumi: the finished tail fan
The tail fan, finished

Dorsal fin

Worked in orange.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)
Rnd 3(sc 3, inc) x3(15)
Rnd 4(sc 4, inc) x3(18)
Rnd 5(sc 5, inc) x3(21)
Rnd 6(sc 6, inc) x3(24)

Check: Yours should look like an open cup about 1.5 in (3.8 cm) wide and 0.6 in (1.5 cm) deep, with 24 stitches around the edge.

RoundInstructionsStitches
Rnd 7sc in each st around(24)

Note: Press the opening flat, with the stitches of the two layers lined up. Crochet across through both layers, 12 sc, one through each pair of stitches, to close it in a straight seam. Cut the yarn leaving a long tail (about 12 in / 30 cm), you'll sew the dorsal fin on along this seam.

Check: Done! Your dorsal fin should now be a flat double layer about 2.1 in (5.4 cm) wide and 1.1 in (2.7 cm) long (pressed flat, not stuffed) with a straight seam at its end and a long yarn tail.

Goldfish amigurumi: the finished dorsal fin
The dorsal fin, finished

Putting the goldfish together

All your pieces are ready, so let's sew them together and watch your fish come to life.

Goldfish crochet assembly: attach the side fins

1. Attach the side fins

Place the first one on the body at round 14, one on each side. Hold the straight seam against the body and sew along it through both pieces, back and forth. It should end up pointing out and backward, about 30 degrees from straight out. Then do the same for the other one on the other side, mirrored.

Goldfish crochet assembly: attach the tail fans

2. Attach the tail fans

Place the first one on the body at round 18, one on each side, toward the back. Hold the straight seam against the body and sew along it through both pieces, back and forth. It should end up pointing out and toward the toy's left, about 22 degrees from straight out. Then do the same for the other one on the other side, mirrored.

Goldfish crochet assembly: attach the dorsal fin

3. Attach the dorsal fin

Place it on the body at round 34, at the back, in the middle. Hold the straight seam against the body and sew along it through both pieces, back and forth. It should end up pointing straight out.

Goldfish crochet assembly: sew the cheeks

4. Sew the cheeks

With peach yarn on the cream belly and chin patch, around round 6, on the circle. How: 2 short stitches side by side make one cheek.

Goldfish crochet assembly: sew the mouth

5. Sew the mouth

With black yarn on the cream belly and chin patch, around round 7, on the circle. How: come up at one corner, go down 3 stitches along, then catch the middle of that long stitch and pull it down one round to make a curve.

Goldfish crochet assembly: sew the tail fin middle ray

6. Sew the tail fin middle ray

With terracotta yarn on the tail fan, around round 8, one on each side. How: small stitches one after another, going up the rounds, one stitch per round.

Goldfish crochet assembly: sew the tail fin upper ray

7. Sew the tail fin upper ray

With terracotta yarn on the tail fan, around round 8, one on each side of the front. How: small stitches one after another, going up the rounds, one stitch per round.

Goldfish crochet assembly: sew the tail fin lower ray

8. Sew the tail fin lower ray

With terracotta yarn on the tail fan, around round 8, one on each side, toward the back. How: small stitches one after another, going up the rounds, one stitch per round.

Goldfish crochet assembly: sew the side fin middle ray

9. Sew the side fin middle ray

With terracotta yarn on the side fin, around round 4, at the front, in the middle. How: small stitches one after another, going up the rounds, one stitch per round.

Goldfish crochet assembly: sew the side fin outer rays

10. Sew the side fin outer rays

With terracotta yarn on the side fin, around round 4, one on each side of the front. How: small stitches one after another, going up the rounds, one stitch per round.

Goldfish crochet assembly: sew the side fin back rays

11. Sew the side fin back rays

With terracotta yarn on the side fin, around round 4, one on each side, toward the back. How: small stitches one after another, going up the rounds, one stitch per round.

Goldfish crochet assembly: sew the dorsal fin middle ray

12. Sew the dorsal fin middle ray

With terracotta yarn on the dorsal fin, around round 4, one on each side. How: small stitches one after another, going up the rounds, one stitch per round.

Goldfish crochet assembly: sew the dorsal fin front ray

13. Sew the dorsal fin front ray

With terracotta yarn on the dorsal fin, around round 4, one on each side of the front. How: small stitches one after another, going up the rounds, one stitch per round.

Goldfish crochet assembly: sew the dorsal fin back ray

14. Sew the dorsal fin back ray

With terracotta yarn on the dorsal fin, around round 4, one on each side, toward the back. How: small stitches one after another, going up the rounds, one stitch per round.

Goldfish crochet assembly: hide the tails

15. Hide the tails

For every loose tail: thread it on the needle, poke it into the toy and out somewhere else, give it a little tug, and snip it close. The end disappears inside. All done!

All done!

You did it, your very own fish is finished and ready to swim into someone's arms! Be proud of every stitch, because you made this with your own two hands.

Made one? Share it with #crochetpirate. We'd love to see it.

Prefer paper?

The whole pattern as a printable PDF, free with a Crochet Pirate account. Sign in, and your download starts right away.

Questions about this pattern

How big is this crochet fish?

About 5.5 in (14 cm) tall and just as long in DK (light worsted) cotton on a 3.5 mm (US E-4) hook. A thicker yarn and a bigger hook make a bigger fish from the same rounds.

How is the goldfish's double tail made?

The tail is made of two tail fans. You crochet each one in the round, like a little cup, going out to 32 stitches and back down to 16. Then you press it flat and close it with a straight row of single crochet through both layers. Both fans get sewn on by that straight seam, side by side at the back. The fins go on the same way too.

How do you add the lines on the fins?

Once the fins are attached, you embroider them with terracotta yarn: little stitches, one after another, going up the rounds, three lines on every tail fan, the side fin, and the dorsal fin on top.

Is this fish pattern good for beginners?

Yep. It's listed as easy: you work the body as one big ball, the fins are tiny flat pieces, and the only stitches used are single crochet, increases, and decreases, and each round tells you the stitch count.

What yarn and hook do I need?

DK (light worsted) cotton with a 3.5 mm (US E-4) hook, in 6 colors: cream, white, orange, peach, black, terracotta. Any yarn works if you go up or down a hook size to keep the stitches tight.

Can I sell what I make?

Yes, you're welcome to sell the toys you make from this pattern, and a mention of Crochet Pirate is appreciated. Please don't share or sell the pattern itself; link to this page instead.

Copyright 2026 Crochet Pirate. This pattern is free for personal use.

The Crochet Pirate app

Snap a photo. Get your own pattern.

Snap anything you love, like a pet, a mug or a drawing. Crochet Pirate designs it as an amigurumi, then walks you through every stitch with a picture at each checkpoint and a counter for your rounds.

Step 1: a photo of a small dog in a red bandana

Snap a photo

Step 2: the dog as a crochet toy, with the first rounds of its pattern

Get your pattern

Step 3: the finished crochet dog held in a hand

Crochet it