Hi there! You're going to crochet a happy little ladybug, and no prior skills are needed. We'll take it slow, one part at a time, and each step is simpler than it seems.
At a glance
| Skill level | Easy |
| Finished size | about 6 in (15 cm) tall |
| Yarn | worsted (aran) acrylic |
| Hook | 4 mm (US G-6) |
| Colors | Red, Black, White, Pink, Brick red |
| Pieces | body (red shell), belly (black underside), left eye white, right eye white, head, leg x6, antenna x2, shell stripe, back half, shell stripe, front half, spot, front upper x2, spot, front middle x2, spot, front lower x2, spot, side top x2, spot, side middle x2, spot, back upper x2, spot, back middle x2, spot, back lower x2 |
What you'll need
Yarn
worsted (aran): yarn weight 4, medium
- Red: about 82 yd (75 m), 1 ball, 1.75 oz / 98 yd (50 g / 90 m)
- Black: about 87 yd (80 m), 1 ball, 1.75 oz / 98 yd (50 g / 90 m)
- White: a small scrap
- Pink: a small scrap
- Brick red: a small scrap
Tools and notions
- 4 mm crochet hook: for worsted (aran) acrylic yarn
- 15 mm black safety eyes: 1
- 15 mm black safety eyes: 1
- Polyester toy stuffing: a couple of big handfuls
- Yarn needle (big eye, blunt tip)
- 1 stitch marker: a paperclip or scrap of yarn works too
- Scissors
Size and gauge
Ladybug comes out about 6 in (15 cm) tall in this yarn, with a 4 mm (US G-6) hook: about 17 sc and 19 rounds to 4 in (10 cm). Gauge isn't critical: another yarn or hook only changes the size.
Abbreviations (US terms)
| Rnd | round, worked in a continuous spiral: don't join, move the stitch marker up each round |
| Row | worked back and forth: turn at the end of each row |
| sc | single crochet |
| inc | increase: 2 sc in the same stitch |
| dec | decrease: sc 2 stitches together (the invisible decrease looks neatest) |
| ch | chain |
| st(s) | stitch(es) |
| ( ) x6 | repeat what's in brackets 6 times |
| (12) | the stitches you have at the end of the round |
New to these? Our crochet abbreviations page shows how to work each one.
Good to know
- Crochet tightly so the stuffing doesn't show through. Seeing gaps? Go down a hook size.
- Work in a spiral and move your stitch marker up at the start of each round.
- Leave a long tail on every piece you'll sew on.
- Safety eyes and small parts can be a choking hazard for children under 3. For little ones, embroider the eyes instead.
Techniques in this pattern
New to one of these? Each tutorial shows it step by step, with photos.
- Magic ring: how the round pieces start
- Invisible decrease: smooth shaping without gaps
- Safety eyes: where they go and how they lock
- Sewing the pieces together: neat seams that hide
- Reading the pattern: rounds, repeats and stitch counts

Rather follow pictures? Make the ladybug in the app.
Crochet Pirate walks you through this pattern one step at a time: a picture at every checkpoint and a counter for your rounds.
Ladybug crochet pattern
Make each piece in order, counting your stitches at the end of every round: the number in brackets is how many you should have.
Body (red shell)
Worked in red.
Note: Ch 5. Make a slip knot and chain 5. That short chain is the spine of the oval, you'll crochet all the way around it.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | sc 3, 3 sc in last ch, sc 3, 3 sc in skipped ch | (12) |
| Rnd 2 | sc 3, inc x3, sc 3, inc x3 | (18) |
| Rnd 3 | sc 3, (sc, inc) x3, sc 3, (sc, inc) x3 | (24) |
| Rnd 4 | sc 3, (sc 2, inc) x3, sc 3, (sc 2, inc) x3 | (30) |
| Rnd 5 | sc 3, (sc 3, inc) x3, sc 3, (sc 3, inc) x3 | (36) |
| Rnd 6 | sc 3, (sc 4, inc) x3, sc 3, (sc 4, inc) x3 | (42) |
| Rnd 7 | sc 3, (sc 5, inc) x3, sc 3, (sc 5, inc) x3 | (48) |
| Rnd 8 | sc 3, (sc 6, inc) x3, sc 3, (sc 6, inc) x3 | (54) |
| Rnd 9 | sc 3, (sc 7, inc) x3, sc 3, (sc 7, inc) x3 | (60) |
| Rnd 10 | sc 3, (sc 8, inc) x3, sc 3, (sc 8, inc) x3 | (66) |
| Rnd 11 | sc 3, (sc 9, inc) x3, sc 3, (sc 9, inc) x3 | (72) |
| Rnd 12 | sc 3, (sc 10, inc) x3, sc 3, (sc 10, inc) x3 | (78) |
Check: Yours should look like a small flat oval with 78 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnds 13-23 | sc in each st around | (78) |
| Rnd 24 | sc 3, (sc 10, dec) x3, sc 3, (sc 10, dec) x3 | (72) |
Check: Yours should look like an open cup about 5.5 in (14.6 cm) wide and 2.3 in (5.9 cm) deep, with 72 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 25 | sc 3, (sc 9, dec) x3, sc 3, (sc 9, dec) x3 | (66) |
| Rnd 26 | sc 3, (sc 8, dec) x3, sc 3, (sc 8, dec) x3 | (60) |
| Rnd 27 | sc 3, (sc 7, dec) x3, sc 3, (sc 7, dec) x3 | (54) |
| Rnd 28 | sc 3, (sc 6, dec) x3, sc 3, (sc 6, dec) x3 | (48) |
| Rnd 29 | sc 3, (sc 5, dec) x3, sc 3, (sc 5, dec) x3 | (42) |
| Rnd 30 | sc 3, (sc 4, dec) x3, sc 3, (sc 4, dec) x3 | (36) |
| Rnd 31 | sc 3, (sc 3, dec) x3, sc 3, (sc 3, dec) x3 | (30) |
| Rnd 32 | sc 3, (sc 2, dec) x3, sc 3, (sc 2, dec) x3 | (24) |
Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.
Check: Yours should look like a stuffed piece about 6 in (15.4 cm) wide and 4.6 in (11.7 cm) tall, with an opening of 24 stitches left.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 33 | sc 3, (sc, dec) x3, sc 3, (sc, dec) x3 | (18) |
| Rnd 34 | sc 3, dec x3, sc 3, dec x3 | (12) |
| Rnd 35 | dec x6 | (6) |
Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight, the hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.
Check: Done! Your body (red shell) should now be a firmly stuffed, fully closed piece about 5.5 in (14.2 cm) wide and 5.5 in (13.5 cm) tall.

Belly (black underside)
Worked in black.
Note: Ch 5. Make a slip knot and chain 5. That short chain is the spine of the oval, you'll crochet all the way around it.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | sc 3, 3 sc in last ch, sc 3, 3 sc in skipped ch | (12) |
| Rnd 2 | sc 3, inc x3, sc 3, inc x3 | (18) |
| Rnd 3 | sc 3, (sc, inc) x3, sc 3, (sc, inc) x3 | (24) |
| Rnd 4 | sc 3, (sc 2, inc) x3, sc 3, (sc 2, inc) x3 | (30) |
| Rnd 5 | sc 3, (sc 3, inc) x3, sc 3, (sc 3, inc) x3 | (36) |
Check: Yours should look like a small flat oval with 36 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 6 | sc 3, (sc 4, inc) x3, sc 3, (sc 4, inc) x3 | (42) |
| Rnd 7 | sc 3, (sc 5, inc) x3, sc 3, (sc 5, inc) x3 | (48) |
| Rnd 8 | sc 3, (sc 6, inc) x3, sc 3, (sc 6, inc) x3 | (54) |
| Rnd 9 | sc 3, (sc 7, inc) x3, sc 3, (sc 7, inc) x3 | (60) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.
Check: Done! Your belly (black underside) should now be a flat oval about 4.7 in (11.9 cm) long and 4.4 in (11.2 cm) wide with a long yarn tail.

Left eye white
Worked in white.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing. Set it aside: it goes on the head while you make it, just before the eyes go in.
Check: Done! Your left eye white should now be a flat circle about 0.9 in (2.2 cm) across with a long yarn tail.

Right eye white
Worked in white.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing. Set it aside: it goes on the head while you make it, just before the eyes go in.
Check: Done! Your right eye white should now be a flat circle about 0.9 in (2.2 cm) across with a long yarn tail.

Head
Worked in black.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
| Rnd 3 | (sc, inc) x6 | (18) |
| Rnd 4 | (sc 2, inc) x6 | (24) |
| Rnd 5 | (sc 3, inc) x6 | (30) |
| Rnd 6 | (sc 4, inc) x6 | (36) |
| Rnd 7 | (sc 5, inc) x6 | (42) |
| Rnd 8 | (sc 6, inc) x6 | (48) |
Check: Yours should look like a flat circle about 3.5 in (9 cm) across, with 48 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnds 9-11 | sc in each st around | (48) |
Note: Eye time, the face goes on first. Take the left eye white and right eye white you made earlier. Pin the left eye white on round 11, at the front, a little to the toy's left and the right eye white on round 11, at the front, a little to the toy's right. Push each safety eye through the right eye white and the left eye white and into the head between round 10 and round 11. Look at it from a distance, then snap the backs on inside: once they click, they stay forever. While you can still reach inside, sew around the edge of each left eye white and right eye white with its long tail, the bottom one first.
| Round | Instructions | Stitches |
|---|---|---|
| Rnds 12-13 | sc in each st around | (48) |
| Rnd 14 | (sc 6, dec) x6 | (42) |
Check: Yours should look like an open cup about 3.5 in (9 cm) wide and 1.1 in (2.7 cm) deep, with 42 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 15 | (sc 5, dec) x6 | (36) |
| Rnd 16 | (sc 4, dec) x6 | (30) |
| Rnd 17 | (sc 3, dec) x6 | (24) |
Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.
Check: Yours should look like a stuffed piece about 3.6 in (9.2 cm) wide and 2.3 in (5.9 cm) tall, with an opening of 24 stitches left.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 18 | (sc 2, dec) x6 | (18) |
| Rnd 19 | (sc, dec) x6 | (12) |
| Rnd 20 | dec x6 | (6) |
Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight, the hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.
Check: Done! Your head should now be a firmly stuffed, fully closed piece about 3.1 in (7.8 cm) wide and 3.1 in (7.8 cm) tall.

Leg (make 6)
Worked in black.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
Check: Yours should look like a flat circle about 0.9 in (2.2 cm) across, with 12 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnds 3-6 | sc in each st around | (12) |
Note: Slip stitch into the next stitch, then cut the yarn leaving a long tail (about 12 in / 30 cm), you'll sew the leg on with it. Stuff it softly, pushing the stuffing to the end with the back of your hook.
Check: Done! Your leg should now be an open piece about 1 in (2.6 cm) wide and 1.1 in (2.7 cm) long, with a long yarn tail.

Antenna (make 2)
Worked in black.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 5 sc in magic ring | (5) |
| Rnds 2-4 | sc in each st around | (5) |
| Rnd 5 | inc x4, sc | (9) |
Check: Yours should look like an open cup about 0.7 in (1.7 cm) wide and 0.9 in (2.2 cm) deep, with 9 stitches around the edge.
| Round | Instructions | Stitches |
|---|---|---|
| Rnds 6-7 | sc in each st around | (9) |
Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.
Check: Yours should look like a stuffed piece about 0.7 in (1.9 cm) wide and 1.3 in (3.4 cm) tall, with an opening of 9 stitches left.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 8 | dec x4, sc | (5) |
Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight, the hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.
Check: Done! Your antenna should now be a firmly stuffed, fully closed piece about 0.7 in (1.9 cm) wide and 1.6 in (4.1 cm) tall.

Shell stripe, back half
Worked in black.
Note: Ch 25. Make a slip knot and chain 25. This piece is flat: you crochet back and forth along that chain in rows, turning at the end of each one.
| Round | Instructions | Stitches |
|---|---|---|
| Row 1 | sc 24 | (24) |
| Row 2 | ch 1, turn, sc 24 | (24) |
Note: Cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing, and pull it through the last loop.
Check: Done! Your shell stripe, back half should now be a flat strip about 5.5 in (14.1 cm) wide and 0.4 in (1.1 cm) tall with a long yarn tail.

Shell stripe, front half
Worked in black.
Note: Ch 17. Make a slip knot and chain 17. This piece is flat: you crochet back and forth along that chain in rows, turning at the end of each one.
| Round | Instructions | Stitches |
|---|---|---|
| Row 1 | sc 16 | (16) |
| Row 2 | ch 1, turn, sc 16 | (16) |
Note: Cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing, and pull it through the last loop.
Check: Done! Your shell stripe, front half should now be a flat strip about 3.7 in (9.4 cm) wide and 0.4 in (1.1 cm) tall with a long yarn tail.

Spot, front upper (make 2)
Worked in black.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.
Check: Done! Your spot, front upper should now be a flat circle about 0.9 in (2.2 cm) across with a long yarn tail.

Spot, front middle (make 2)
Worked in black.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.
Check: Done! Your spot, front middle should now be a flat circle about 0.9 in (2.2 cm) across with a long yarn tail.

Spot, front lower (make 2)
Worked in black.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.
Check: Done! Your spot, front lower should now be a flat circle about 0.9 in (2.2 cm) across with a long yarn tail.

Spot, side top (make 2)
Worked in black.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.
Check: Done! Your spot, side top should now be a flat circle about 0.9 in (2.2 cm) across with a long yarn tail.

Spot, side middle (make 2)
Worked in black.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.
Check: Done! Your spot, side middle should now be a flat circle about 0.9 in (2.2 cm) across with a long yarn tail.

Spot, back upper (make 2)
Worked in black.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.
Check: Done! Your spot, back upper should now be a flat circle about 0.9 in (2.2 cm) across with a long yarn tail.

Spot, back middle (make 2)
Worked in black.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.
Check: Done! Your spot, back middle should now be a flat circle about 0.9 in (2.2 cm) across with a long yarn tail.

Spot, back lower (make 2)
Worked in black.
| Round | Instructions | Stitches |
|---|---|---|
| Rnd 1 | 6 sc in magic ring | (6) |
| Rnd 2 | inc x6 | (12) |
Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.
Check: Done! Your spot, back lower should now be a flat circle about 0.9 in (2.2 cm) across with a long yarn tail.

Putting the ladybug together
All your pieces are ready, so let's sew them together and watch your ladybug come to life.

1. Attach the belly (black underside)
Place it right on the bottom of the body (red shell) (round 1), centered. Pin the flat belly (black underside) flat on the body (red shell), its long side running toward the toy's left, and sew around its edge with the long tail, catching the body (red shell) underneath with every stitch. It will curve to follow the body (red shell), that's what you want.

2. Attach the antennas
Place the first one on the head at round 17, one on each side of the front. Hold the starting end of the antenna (where the magic ring is) against the head and sew around where they touch, going back and forth, then pull the yarn snug so there's no gap. It should end up pointing straight out. Then do the same for the other one on the other side, mirrored.

3. Attach the head
Place it on the body (red shell) at round 17, at the front, in the middle. Hold the closed end of the head against the body (red shell) and sew around where they touch, then pull the yarn snug so there's no gap. It should end up lying along it, pointing down.

4. Attach the legs
They go on the body (red shell) at round 10, spread evenly round the back: the first one at the front, a little to the toy's left, the last one at the front, a little to the toy's right. Pin them all first so the gaps are even. For each one: hold the open edge flat against the body (red shell) and pin it all round. Using the long tail, sew all the way around the edge: under one stitch of the leg, then under the body (red shell) right next to it. Add a last bit of stuffing just before the gap closes. It should end up pointing out and down, about 40 degrees from straight out.

5. Attach the shell stripe, back half
Place it on the body (red shell) at round 23, at the back, in the middle. Pin the flat shell stripe, back half flat on the body (red shell), and sew around its edge with the long tail, catching the body (red shell) underneath with every stitch. It will curve to follow the body (red shell), that's what you want.

6. Attach the shell stripe, front half
Place it on the body (red shell) at round 27, at the front, in the middle. Pin the flat shell stripe, front half flat on the body (red shell), and sew around its edge with the long tail, catching the body (red shell) underneath with every stitch. It will curve to follow the body (red shell), that's what you want.

7. Attach the spot, front uppers
Place the first one on the body (red shell) at round 26, one on each side of the front. Pin the flat spot, front upper flat on the body (red shell), and sew around its edge with the long tail, catching the body (red shell) underneath with every stitch. It will curve to follow the body (red shell), that's what you want. Then do the same for the other one on the other side, mirrored.

8. Attach the spot, front middles
Place the first one on the body (red shell) at round 21, one on each side of the front. Pin the flat spot, front middle flat on the body (red shell), and sew around its edge with the long tail, catching the body (red shell) underneath with every stitch. It will curve to follow the body (red shell), that's what you want. Then do the same for the other one on the other side, mirrored.

9. Attach the spot, front lowers
Place the first one on the body (red shell) at round 16, one on each side of the front. Pin the flat spot, front lower flat on the body (red shell), and sew around its edge with the long tail, catching the body (red shell) underneath with every stitch. It will curve to follow the body (red shell), that's what you want. Then do the same for the other one on the other side, mirrored.

10. Attach the spot, side tops
Place the first one on the body (red shell) at round 27, one on each side. Pin the flat spot, side top flat on the body (red shell), and sew around its edge with the long tail, catching the body (red shell) underneath with every stitch. It will curve to follow the body (red shell), that's what you want. Then do the same for the other one on the other side, mirrored.

11. Attach the spot, side middles
Place the first one on the body (red shell) at round 20, one on each side. Pin the flat spot, side middle flat on the body (red shell), and sew around its edge with the long tail, catching the body (red shell) underneath with every stitch. It will curve to follow the body (red shell), that's what you want. Then do the same for the other one on the other side, mirrored.

12. Attach the spot, back uppers
Place the first one on the body (red shell) at round 26, one on each side, toward the back. Pin the flat spot, back upper flat on the body (red shell), and sew around its edge with the long tail, catching the body (red shell) underneath with every stitch. It will curve to follow the body (red shell), that's what you want. Then do the same for the other one on the other side, mirrored.

13. Attach the spot, back middles
Place the first one on the body (red shell) at round 21, one on each side, toward the back. Pin the flat spot, back middle flat on the body (red shell), and sew around its edge with the long tail, catching the body (red shell) underneath with every stitch. It will curve to follow the body (red shell), that's what you want. Then do the same for the other one on the other side, mirrored.

14. Attach the spot, back lowers
Place the first one on the body (red shell) at round 16, one on each side, toward the back. Pin the flat spot, back lower flat on the body (red shell), and sew around its edge with the long tail, catching the body (red shell) underneath with every stitch. It will curve to follow the body (red shell), that's what you want. Then do the same for the other one on the other side, mirrored.

15. Sew the cheeks
With pink yarn on the head, around round 9, one on each side of the front. How: 2 short stitches side by side make one cheek.

16. Sew the mouth
With brick red yarn on the head, around round 9, at the front, in the middle. How: come up at one corner, go down 3 stitches along, then catch the middle of that long stitch and pull it down one round to make a curve.

17. Hide the tails
For every loose tail: thread it on the needle, poke it into the toy and out somewhere else, give it a little tug, and snip it close. The end disappears inside. All done!
All done!
You did it! Your own ladybug is done, spots and everything, and you made all of it yourself.
Made one? Share it with #crochetpirate. We'd love to see it.
Prefer paper?
The whole pattern as a printable PDF, free with a Crochet Pirate account. Sign in, and your download starts right away.
More patterns like this
- Yellow snail crochet pattern (Intermediate)
- Black spider crochet pattern (Intermediate)
- Bumblebee crochet pattern (Advanced)
- Mushroom crochet pattern (Advanced)
Questions about this pattern
How big is this crochet ladybug?
Roughly 6 in (15 cm) tall and about the same width, using worsted (aran) acrylic and a 4 mm (US G-6) hook. Same rounds, but with thicker yarn and a larger hook, you get a bigger ladybug.
How are the ladybug's spots and stripe made?
Each spot is a tiny flat circle of two rounds: 6 single crochet in a magic ring, then 12. You make 16 spots, two of each kind, and sew them flat on the red shell in rows down both sides. The black stripe down the middle is two short flat strips of 2 rows each, 24 stitches for the back half and 16 for the front half.
How is the ladybug's round shell made?
The red shell is made as one piece. You start with a chain of 5, then work round and round to make an oval of 78 stitches, and after you stuff it, you decrease it closed. Underneath, a flat black oval of 60 stitches gets sewn on as the belly. The head and six short legs are added after that.
Is this ladybug pattern good for beginners?
Sure. It's listed as easy: every round lists its stitch count so you can check as you go, the pieces are mostly small, and the only stitches used are single crochet, increases and decreases.
What yarn and hook do I need?
Worsted (aran) acrylic and a 4 mm (US G-6) hook, using 5 colors: red, black, white, pink, brick red. Any yarn is fine if you change your hook size up or down so the stitches stay tight.
Can I sell what I make?
Yes, you're welcome to sell the toys you make from this pattern, and a mention of Crochet Pirate is appreciated. Please don't share or sell the pattern itself; link to this page instead.
Copyright 2026 Crochet Pirate. This pattern is free for personal use.





