Take a picture of any toy, and you'll get a crochet pattern that's all yours. Make yours in the app

Home > Free Patterns > Home & Decor > Crochet Pumpkin Pattern: Free Amigurumi Jack-o'-Lantern
Jack-o'-lantern pumpkin free amigurumi crochet pattern, with two more pictures of the finished toy
Free crochet pattern

Crochet Pumpkin Pattern: Free Amigurumi Jack-o'-Lantern

Free Jack-o'-lantern pumpkin amigurumi crochet pattern: easy, about 5.5 in (14 cm) tall in fingering (4-ply) yarn. Every round with its stitch count, photos and a PDF.

What you see is what you make

Not made up by AI: every pattern picture (the toy, each piece, each step) starts as a 3D render of this pattern's own stitches from our crochet engine. An image model turns each render into the photo you see, and the shape is checked against the render.

Hi there! You're going to crochet a happy, squishy pumpkin with a big smile, and we'll go through each tiny step side by side, so it's simple even if you've never picked up a hook before.

At a glance

Skill levelEasy
Finished sizeabout 5.5 in (14 cm) tall
Yarnfingering (4-ply) cotton
Hook2.5 mm
ColorsOrange, Dark green, Dark chocolate, Terracotta
Piecespumpkin, curly stem, leaf, triangle eye x2, triangle nose, grinning mouth

What you'll need

Yarn

fingering (4-ply): yarn weight 1, super fine

  • Orange: about 77 yd (70 m), 1 ball, 1.75 oz / 186 yd (50 g / 170 m)
  • Dark green: about 9 yd (8 m), 1 ball, 1.75 oz / 186 yd (50 g / 170 m)
  • Dark chocolate: about 8 yd (7 m), 1 ball, 1.75 oz / 186 yd (50 g / 170 m)
  • Terracotta: a small scrap

Tools and notions

  • 2.5 mm crochet hook: for fingering (4-ply) cotton yarn
  • Polyester toy stuffing: a couple of big handfuls
  • Yarn needle (big eye, blunt tip)
  • 1 stitch marker: a paperclip or scrap of yarn works too
  • Scissors

Size and gauge

The jack-o'-lantern pumpkin ends up roughly 5.5 in (14 cm) tall using this yarn and a 2.5 mm hook: around 27 sc and 30 rounds per 4 in (10 cm). Gauge doesn't really matter: a different yarn or hook just makes it a different size.

Abbreviations (US terms)

Rndround, worked in a continuous spiral: don't join, move the stitch marker up each round
Rowworked back and forth: turn at the end of each row
scsingle crochet
incincrease: 2 sc in the same stitch
decdecrease: sc 2 stitches together (the invisible decrease looks neatest)
chchain
st(s)stitch(es)
( ) x6repeat what's in brackets 6 times
(12)the stitches you have at the end of the round

New to these? Our crochet abbreviations page shows how to work each one.

Good to know

  • Crochet tightly so the stuffing doesn't show through. Seeing gaps? Go down a hook size.
  • Work in a spiral and move your stitch marker up at the start of each round.
  • Leave a long tail on every piece you'll sew on.
  • Safety eyes and small parts can be a choking hazard for children under 3. For little ones, embroider the eyes instead.

Techniques in this pattern

New to one of these? Each tutorial shows it step by step, with photos.

All the crocheted pieces of the Jack-o'-lantern pumpkin amigurumi, laid out
The pieces you'll make: pumpkin, curly stem, leaf, triangle eye (2), triangle nose, grinning mouth.

Rather follow pictures? Make the jack-o'-lantern pumpkin in the app.

Crochet Pirate walks you through this pattern one step at a time: a picture at every checkpoint and a counter for your rounds.

Jack-o'-lantern pumpkin crochet pattern

Make each piece in order, counting your stitches at the end of every round: the number in brackets is how many you should have.

Pumpkin

Worked in orange.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)
Rnd 3(sc, inc) x6(18)
Rnd 4(sc 2, inc) x6(24)
Rnd 5(sc 3, inc) x6(30)
Rnd 6(sc 4, inc) x6(36)
Rnd 7(sc 5, inc) x6(42)
Rnd 8(sc 6, inc) x6(48)
Rnd 9(sc 7, inc) x6(54)
Rnd 10(sc 8, inc) x6(60)
Rnd 11(sc 9, inc) x6(66)

Check: Yours should look like a flat circle about 3.1 in (7.8 cm) across, with 66 stitches around the edge.

RoundInstructionsStitches
Rnd 12sc in each st around(66)
Rnd 13(sc 10, inc) x6(72)
Rnd 14(sc 11, inc) x6(78)
Rnd 15sc in each st around(78)
Rnd 16(sc 12, inc) x6(84)
Rnd 17(sc 13, inc) x6(90)
Rnd 18sc in each st around(90)
Rnd 19(sc 14, inc) x6(96)
Rnds 20-27sc in each st around(96)
Rnd 28(sc 14, dec) x6(90)

Check: Yours should look like an open cup about 4.4 in (11.3 cm) wide and 1.5 in (3.7 cm) deep, with 90 stitches around the edge.

RoundInstructionsStitches
Rnd 29sc in each st around(90)
Rnd 30(sc 13, dec) x6(84)
Rnd 31sc in each st around(84)
Rnd 32(sc 12, dec) x6(78)
Rnd 33(sc 11, dec) x6(72)
Rnd 34(sc 10, dec) x6(66)
Rnd 35(sc 9, dec) x6(60)
Rnd 36(sc 8, dec) x6(54)
Rnd 37(sc 7, dec) x6(48)
Rnd 38(sc 6, dec) x6(42)
Rnd 39(sc 5, dec) x6(36)
Rnd 40(sc 4, dec) x6(30)

Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.

Check: Yours should look like a stuffed piece about 4.6 in (11.6 cm) wide and 3.6 in (9.2 cm) tall, with an opening of 30 stitches left.

RoundInstructionsStitches
Rnd 41(sc 3, dec) x6(24)
Rnd 42(sc 2, dec) x6(18)
Rnd 43(sc, dec) x6(12)
Rnd 44dec x6(6)

Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight, the hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.

Check: Done! Your pumpkin should now be a firmly stuffed, fully closed piece about 4.2 in (10.7 cm) wide and 4.2 in (10.6 cm) tall.

Jack-o'-lantern pumpkin amigurumi: the finished pumpkin
The pumpkin, finished

Curly stem

Worked in dark green.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2inc x6(12)
Rnd 3(sc, inc) x6(18)

Check: Yours should look like a flat circle about 0.8 in (2.1 cm) across, with 18 stitches around the edge.

RoundInstructionsStitches
Rnds 4-6sc in each st around(18)
Rnd 7sc 14, dec x2(16)
Rnd 8sc in each st around(16)

Note: Stuff it now, while the hole is still big enough. Use small tufts, push them into the far end first, and keep going until it feels firm and springy. Top it up a little before the last lap.

Check: Yours should look like a stuffed piece about 0.9 in (2.4 cm) wide and 0.8 in (2.1 cm) tall, with an opening of 16 stitches left.

RoundInstructionsStitches
Rnd 9sc 12, dec x2(14)
Rnd 10sc 10, dec x2(12)
Rnd 11sc 8, dec x2(10)
Rnd 12sc 6, dec x2(8)
Rnd 13sc 4, dec x2(6)

Note: Cut the yarn, leaving a tail as long as your hand. Thread it on the yarn needle, go through the front loop of each of the last stitches, and pull tight, the hole closes like a drawstring bag. Leave a long tail if this piece gets sewn on; otherwise hide it inside.

Check: Done! Your curly stem should now be a firmly stuffed, fully closed piece about 0.9 in (2.4 cm) wide and 1.6 in (4 cm) tall.

Jack-o'-lantern pumpkin amigurumi: the finished curly stem
The curly stem, finished

Leaf

Worked in dark green.

Note: Ch 5. Make a slip knot and chain 5. This piece is flat: you crochet back and forth along that chain in rows, turning at the end of each one.

RoundInstructionsStitches
Row 1sc 4(4)
Row 2ch 1, turn, inc, sc 2, inc(6)
Row 3ch 1, turn, inc, sc 4, inc(8)
Row 4ch 1, turn, inc, sc 6, inc(10)

Check: Yours should look like a flat trapezoid about 1.5 in (3.7 cm) wide and 0.5 in (1.3 cm) tall, 10 stitches across its last row.

RoundInstructionsStitches
Rows 5-7ch 1, turn, sc 10(10)
Row 8ch 1, turn, dec, sc 6, dec(8)
Row 9ch 1, turn, sc 8(8)
Row 10ch 1, turn, dec, sc 4, dec(6)
Row 11ch 1, turn, dec, sc 2, dec(4)
Row 12ch 1, turn, dec x2(2)

Note: Cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing, and pull it through the last loop.

Check: Done! Your leaf should now be a flat triangle about 1.5 in (3.7 cm) wide and 1.6 in (4 cm) tall with a long yarn tail.

Jack-o'-lantern pumpkin amigurumi: the finished leaf
The leaf, finished

Triangle eye (make 2)

Worked in dark chocolate.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2(sc, 3 sc in next st) x3(12)
Rnd 3(sc 3, 3 sc in next st) x3(18)

Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.

Check: Done! Your triangle eye should now be a flat triangle about 0.9 in (2.2 cm) along each side with a long yarn tail.

Jack-o'-lantern pumpkin amigurumi: the finished triangle eye
The triangle eye, finished

Triangle nose

Worked in dark chocolate.

RoundInstructionsStitches
Rnd 16 sc in magic ring(6)
Rnd 2(sc, 3 sc in next st) x3(12)

Note: Slip stitch into the next stitch to smooth the edge, then cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing.

Check: Done! Your triangle nose should now be a flat triangle about 0.6 in (1.5 cm) along each side with a long yarn tail.

Jack-o'-lantern pumpkin amigurumi: the finished triangle nose
The triangle nose, finished

Grinning mouth

Worked in dark chocolate.

Note: Ch 19. Make a slip knot and chain 19. This piece is flat: you crochet back and forth along that chain in rows, turning at the end of each one.

RoundInstructionsStitches
Row 1sc 18(18)
Row 2ch 1, turn, sc 18(18)
Row 3ch 1, turn, dec, sc 14, dec(16)

Check: Yours should look like a flat trapezoid about 2.3 in (5.9 cm) wide and 0.4 in (1 cm) tall, 16 stitches across its last row.

RoundInstructionsStitches
Row 4ch 1, turn, dec, sc 12, dec(14)
Row 5ch 1, turn, dec, sc 10, dec(12)
Row 6ch 1, turn, dec, sc 8, dec(10)

Note: Cut the yarn leaving a long tail (about 12 in / 30 cm) for sewing, and pull it through the last loop.

Check: Done! Your grinning mouth should now be a flat trapezoid about 2.6 in (6.7 cm) wide and 0.8 in (2 cm) tall with a long yarn tail.

Jack-o'-lantern pumpkin amigurumi: the finished grinning mouth
The grinning mouth, finished

Putting the jack-o'-lantern pumpkin together

All your pieces are ready, so let's bring the face, stem and leaf together on your pumpkin.

Jack-o'-lantern pumpkin crochet assembly: attach the curly stem

1. Attach the curly stem

Place it right on the top of the pumpkin (its last round, 44), centered. Hold the starting end of the curly stem (where the magic ring is) against the pumpkin and sew around where they touch, going back and forth, then pull the yarn snug so there's no gap. It should end up pointing straight out.

Jack-o'-lantern pumpkin crochet assembly: attach the leaf

2. Attach the leaf

Place it on the pumpkin at round 38, at the front, a little to the toy's left. Pin the flat leaf flat on the pumpkin, and sew around its edge with the long tail, catching the pumpkin underneath with every stitch. It will curve to follow the pumpkin, that's what you want.

Jack-o'-lantern pumpkin crochet assembly: attach the triangle eyes

3. Attach the triangle eyes

Place the first one on the pumpkin at round 26, one on each side of the front. Pin the flat triangle eye flat on the pumpkin, and sew around its edge with the long tail, catching the pumpkin underneath with every stitch. It will curve to follow the pumpkin, that's what you want. Then do the same for the other one on the other side, mirrored.

Jack-o'-lantern pumpkin crochet assembly: attach the grinning mouth

4. Attach the grinning mouth

Place it on the pumpkin at round 18, at the front, in the middle. Pin the flat grinning mouth flat on the pumpkin, and sew around its edge with the long tail, catching the pumpkin underneath with every stitch. It will curve to follow the pumpkin, that's what you want.

Jack-o'-lantern pumpkin crochet assembly: attach the triangle nose

5. Attach the triangle nose

Place it on the pumpkin at round 23, at the front, in the middle. Pin the flat triangle nose flat on the pumpkin, and sew around its edge with the long tail, catching the pumpkin underneath with every stitch. It will curve to follow the pumpkin, that's what you want.

Jack-o'-lantern pumpkin crochet assembly: sew the pumpkin ribs

6. Sew the pumpkin ribs

With terracotta yarn on the pumpkin, in these spots: around round 24, at the front, in the middle; around round 24, one on each side of the front; around round 24, one on each side; around round 24, one on each side, toward the back; around round 24, one on each side, toward the back. How: small stitches one after another, going up the rounds, one stitch per round.

Jack-o'-lantern pumpkin crochet assembly: sew the upper tooth

7. Sew the upper tooth

With orange yarn on the grinning mouth, around round 2, on the circle. How: small stitches one after another, going up the rounds, one stitch per round.

Jack-o'-lantern pumpkin crochet assembly: sew the lower tooth

8. Sew the lower tooth

With orange yarn on the grinning mouth, around round 5, on the circle. How: small stitches one after another, going up the rounds, one stitch per round.

Jack-o'-lantern pumpkin crochet assembly: hide the tails

9. Hide the tails

For every loose tail: thread it on the needle, poke it into the toy and out somewhere else, give it a little tug, and snip it close. The end disappears inside. All done!

All done!

You made it! Your grinning pumpkin is done now, all set to cheer up any shelf. So be proud of what you crafted with your own hands.

Made one? Share it with #crochetpirate. We'd love to see it.

Prefer paper?

The whole pattern as a printable PDF, free with a Crochet Pirate account. Sign in, and your download starts right away.

More patterns like this

Questions about this pattern

How big is this crochet pumpkin?

The pumpkin stands around 5.5 in (14 cm) high, stem included, and measures 4.2 in (10.7 cm) wide. It uses fingering (4-ply) cotton with a 2.5 mm hook. If you grab a thicker yarn and a bigger hook, the same rounds give you a bigger pumpkin.

Can I make a plain fall pumpkin without the face?

Yes. The face is four separate flat pieces (two triangle eyes, a triangle nose and a grinning mouth) sewn on at the end. Leave them out and you have a round orange pumpkin with a green stem, a leaf and terracotta ribs that works for fall and Thanksgiving decor.

How is the pumpkin's stem made?

The stem is a little stuffed tube. Once you've done 3 plain rounds, each round drops 2 stitches on one side only (sc 14, dec x2, then sc 12, dec x2, and so on), so it gets narrower and tips to one side, just like a real pumpkin stem. You stitch it on at its starting end, right at the top.

Is this pumpkin pattern good for beginners?

It's listed as easy: you work one big ball in single crochet rounds with increases and decreases, plus a stem, a leaf made in rows, and the face parts. The ribs are just straight stitches in terracotta yarn, and each round tells you its stitch count.

What yarn and hook do I need?

Fingering (4-ply) cotton and a 2.5 mm hook, in 4 colors: orange, dark green, dark chocolate, terracotta. If you just move your hook size up or down to keep the stitches tight, any yarn works.

Can I sell what I make?

Yes, you're welcome to sell the toys you make from this pattern, and a mention of Crochet Pirate is appreciated. Please don't share or sell the pattern itself; link to this page instead.

Copyright 2026 Crochet Pirate. This pattern is free for personal use.

The Crochet Pirate app

Snap a photo. Get your own pattern.

Snap anything you love, like a pet, a mug or a drawing. Crochet Pirate designs it as an amigurumi, then walks you through every stitch with a picture at each checkpoint and a counter for your rounds.

Step 1: a photo of a small dog in a red bandana

Snap a photo

Step 2: the dog as a crochet toy, with the first rounds of its pattern

Get your pattern

Step 3: the finished crochet dog held in a hand

Crochet it